Thermal analysis of a segmented stator winding design

Rafal Wrobel, Philip Mellor, Derrick Holliday

Research output: Chapter in Book/Report/Conference proceedingConference contribution book

12 Citations (Scopus)

Abstract

This paper presents a thermal analysis of a segmented stator winding design. As the thermal performance is one of the main factors limiting a machine's output capability, a thermal test on a complete prototype machine is an essential part of the design process. However, for the segmented stator winding design a test-informed thermal analysis on a single stator tooth can be performed prior to the manufacture of the full machine. This approach allows for a rapid and inexpensive assessment of the thermal performance of the complete machine and early identification of design modifications needed. The research has been applied to the design of a highly efficient and compact permanent magnet (PM) traction motor. A thermal model for a single tooth was developed and supported by tests to identify key heat transfer coefficients. A number of winding assemblies were compared and the most promising was selected for the final motor prototype. The results from the approach are compared with thermal test results from the complete machine.
Original languageEnglish
Title of host publication2010 IEEE Energy Conversion Congress and Exposition (ECCE '10). Proceedings
Place of PublicationNew York
PublisherIEEE
Pages1290-1297
Number of pages8
ISBN (Print)9781424452866
DOIs
Publication statusPublished - Sep 2010
EventIEEE Energy Conversion Congress and Exposition (ECCE) - Atlanta, United States
Duration: 12 Sep 201016 Sep 2010

Conference

ConferenceIEEE Energy Conversion Congress and Exposition (ECCE)
CountryUnited States
CityAtlanta
Period12/09/1016/09/10

    Fingerprint

Keywords

  • permanent magnet machines
  • electrical machine
  • thermal analysis
  • temperature measurement
  • windings
  • traction motors
  • thermal conductivity
  • stator windings
  • teeth

Cite this

Wrobel, R., Mellor, P., & Holliday, D. (2010). Thermal analysis of a segmented stator winding design. In 2010 IEEE Energy Conversion Congress and Exposition (ECCE '10). Proceedings (pp. 1290-1297). New York: IEEE. https://doi.org/10.1109/ECCE.2010.5617814