### Abstract

estimates for pressure rises in compressible fluids may be inappropriate for use in designing pipelines carrying bubbly fluids. Finally, the end plug simulations show that the plug accelerates quickly after the initial failure but then levels off, and that the final velocity of the end plug can be readily calculated using the numerical model.

Original language | English |
---|---|

Pages (from-to) | 1617-1638 |

Journal | International Journal of Engineering Science |

Volume | 38 |

DOIs | |

Publication status | Published - 1 Sep 2000 |

### Fingerprint

### Keywords

- shock waves
- bubbly fluids
- numerical simulation
- oil/gas industry

### Cite this

*International Journal of Engineering Science*,

*38*, 1617-1638. https://doi.org/10.1016/S0020-7225(99)00127-5

}

*International Journal of Engineering Science*, vol. 38, pp. 1617-1638. https://doi.org/10.1016/S0020-7225(99)00127-5

**The application of a shock wave model to some industrial bubbly fluid flows.** / Shi, Zhusheng; Reese, Jason; Chandler, Howard.

Research output: Contribution to journal › Article

TY - JOUR

T1 - The application of a shock wave model to some industrial bubbly fluid flows

AU - Shi, Zhusheng

AU - Reese, Jason

AU - Chandler, Howard

PY - 2000/9/1

Y1 - 2000/9/1

N2 - An extended numerical model for bubbly oil/gas flows, using a more complete formulation than previously reported, is applied to five situations of industrial interest. Pressure waves propagating due to pressure differences caused by the sudden blocking of a pipeline carrying bubbly fluid, the bursting of a valve separating two regions of different pressures, and the opening and closing of a valve in a pipeline are simulated. In addition, the movement of an end plug to a bubbly flow pipeline when it fails is also modelled. In each case it is found that over-pressures, relative to the applied pressure difference, occur in the propagating pressure waves. The magnitude of the over-pressure increases with the applied pressure difference and appears close to, but not at, the boundary where the pressure difference is first applied. However, gradual application of the pressure difference reduces the maximum over-pressure. In the case of the sudden blockage of a pipeline, the over-pressure also varies with the initial flow velocity and has a greater magnitude than the predicted pressure rise calculated using only the fluid compressibility. Therefore, standardestimates for pressure rises in compressible fluids may be inappropriate for use in designing pipelines carrying bubbly fluids. Finally, the end plug simulations show that the plug accelerates quickly after the initial failure but then levels off, and that the final velocity of the end plug can be readily calculated using the numerical model.

AB - An extended numerical model for bubbly oil/gas flows, using a more complete formulation than previously reported, is applied to five situations of industrial interest. Pressure waves propagating due to pressure differences caused by the sudden blocking of a pipeline carrying bubbly fluid, the bursting of a valve separating two regions of different pressures, and the opening and closing of a valve in a pipeline are simulated. In addition, the movement of an end plug to a bubbly flow pipeline when it fails is also modelled. In each case it is found that over-pressures, relative to the applied pressure difference, occur in the propagating pressure waves. The magnitude of the over-pressure increases with the applied pressure difference and appears close to, but not at, the boundary where the pressure difference is first applied. However, gradual application of the pressure difference reduces the maximum over-pressure. In the case of the sudden blockage of a pipeline, the over-pressure also varies with the initial flow velocity and has a greater magnitude than the predicted pressure rise calculated using only the fluid compressibility. Therefore, standardestimates for pressure rises in compressible fluids may be inappropriate for use in designing pipelines carrying bubbly fluids. Finally, the end plug simulations show that the plug accelerates quickly after the initial failure but then levels off, and that the final velocity of the end plug can be readily calculated using the numerical model.

KW - shock waves

KW - bubbly fluids

KW - numerical simulation

KW - oil/gas industry

UR - http://www.sciencedirect.com/science/article/pii/S0020722599001275

U2 - 10.1016/S0020-7225(99)00127-5

DO - 10.1016/S0020-7225(99)00127-5

M3 - Article

VL - 38

SP - 1617

EP - 1638

JO - International Journal of Engineering Science

JF - International Journal of Engineering Science

SN - 0020-7225

ER -