Abstract
A comparison has been made of the laser processing of Ti-6Al-4V (IMI-318) alloy by (a) nitriding under a dilute atmosphere, (b) preplaced 6 µm SiC powder and (c) a combination of (a) and (b). At least six laser tracks were overlapped. Microhardness maps allowed details of the variation in hardness with both melt depth and track number to be determined. The microstructure was characterised and related to the processing parameters, melt track dimensions, hardness and roughness data. It was found that the preheat generated due to the overlapping, influenced the individual track dimensions, microstructure and properties, which were also affected by the laser energy density and the nitrogen concentration in the nitriding atmosphere used in processing. Process (b) was shown to produce the smoothest surfaces, with Ra values <2μm, whilst (c) gave the highest Ra, value, 8.6 μm. These results are considered together with a wide range of data in the literature on laser processed
Ti-6Al-4V.
Original language | English |
---|---|
Pages (from-to) | 189-200 |
Number of pages | 11 |
Journal | Materials Science and Technology |
Volume | 24 |
Issue number | 2 |
DOIs | |
Publication status | Published - Feb 2008 |
Keywords
- laser surface processing
- titanium alloys
- microstructure
- microhardness
- surface roughness
- materials science
- lasers