Spring back and secondary yielding analyses with endochronic constitutive model

Junping Huang, Xianghe Peng, Yi Qin

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Using thermodynamic consistency elastoplastic large deformation material constitutive model established by a simple mechanism, the model meets basic thermodynamics of irreversible constraints, and taking into account the residual energy stored in the micro stress field, with the corresponding algorithm, prepared a user subroutine UMAT, and embedded into commercial software ABAQUS, the resilience and the secondary yield analyzes of cylindrical workpieces elastic tool upsetting and upsetting when closed mold. comparison of simulation and experiment measured load - displacement relationship can be seen in the plastic deformation of upsetting the first stage of lateral deformation of the workpiece in the axial loading process has been due to the elastic deformation of the mold radial constraint caused by the rapid increase in load; second stage axial pressure reducing mold springback so that the radial deformation of the workpiece can be restored, but with the increase of plastic strain occurs strengthen the work; the third phase of mold constraint lifted, increasing the radial dimension of the work with the constitutive model. calculation closed mold upsetting, showing the calculation results and the experimental results are consistent.
Translated title of the contributionSpring back and secondary yielding analyses with endochronic constitutive model
LanguageChinese
Pages180-183
Number of pages4
JournalChinese Journal of Applied Mechanics
Volume22
Issue number2
Publication statusPublished - 2005

Fingerprint

Constitutive models
Plastic deformation
Thermodynamics
Subroutines
ABAQUS
Elastic deformation
Experiments

Keywords

  • finite deformation
  • elastoplastic
  • resilience

Cite this

Huang, Junping ; Peng, Xianghe ; Qin, Yi. / 春回和內時本構模型二次收益分析. In: Chinese Journal of Applied Mechanics. 2005 ; Vol. 22, No. 2. pp. 180-183.
@article{c60bbe5f11054c6c8a2fa37e30eb285d,
title = "春回和內時本構模型二次收益分析",
abstract = "Using thermodynamic consistency elastoplastic large deformation material constitutive model established by a simple mechanism, the model meets basic thermodynamics of irreversible constraints, and taking into account the residual energy stored in the micro stress field, with the corresponding algorithm, prepared a user subroutine UMAT, and embedded into commercial software ABAQUS, the resilience and the secondary yield analyzes of cylindrical workpieces elastic tool upsetting and upsetting when closed mold. comparison of simulation and experiment measured load - displacement relationship can be seen in the plastic deformation of upsetting the first stage of lateral deformation of the workpiece in the axial loading process has been due to the elastic deformation of the mold radial constraint caused by the rapid increase in load; second stage axial pressure reducing mold springback so that the radial deformation of the workpiece can be restored, but with the increase of plastic strain occurs strengthen the work; the third phase of mold constraint lifted, increasing the radial dimension of the work with the constitutive model. calculation closed mold upsetting, showing the calculation results and the experimental results are consistent.",
keywords = "finite deformation, elastoplastic, resilience",
author = "Junping Huang and Xianghe Peng and Yi Qin",
year = "2005",
language = "Chinese",
volume = "22",
pages = "180--183",
journal = "Chinese Journal of Applied Mechanics",
issn = "1000-4939",
publisher = "Xi'an Jiaotong University",
number = "2",

}

春回和內時本構模型二次收益分析. / Huang, Junping; Peng, Xianghe; Qin, Yi.

In: Chinese Journal of Applied Mechanics, Vol. 22, No. 2, 2005, p. 180-183.

Research output: Contribution to journalArticle

TY - JOUR

T1 - 春回和內時本構模型二次收益分析

AU - Huang, Junping

AU - Peng, Xianghe

AU - Qin, Yi

PY - 2005

Y1 - 2005

N2 - Using thermodynamic consistency elastoplastic large deformation material constitutive model established by a simple mechanism, the model meets basic thermodynamics of irreversible constraints, and taking into account the residual energy stored in the micro stress field, with the corresponding algorithm, prepared a user subroutine UMAT, and embedded into commercial software ABAQUS, the resilience and the secondary yield analyzes of cylindrical workpieces elastic tool upsetting and upsetting when closed mold. comparison of simulation and experiment measured load - displacement relationship can be seen in the plastic deformation of upsetting the first stage of lateral deformation of the workpiece in the axial loading process has been due to the elastic deformation of the mold radial constraint caused by the rapid increase in load; second stage axial pressure reducing mold springback so that the radial deformation of the workpiece can be restored, but with the increase of plastic strain occurs strengthen the work; the third phase of mold constraint lifted, increasing the radial dimension of the work with the constitutive model. calculation closed mold upsetting, showing the calculation results and the experimental results are consistent.

AB - Using thermodynamic consistency elastoplastic large deformation material constitutive model established by a simple mechanism, the model meets basic thermodynamics of irreversible constraints, and taking into account the residual energy stored in the micro stress field, with the corresponding algorithm, prepared a user subroutine UMAT, and embedded into commercial software ABAQUS, the resilience and the secondary yield analyzes of cylindrical workpieces elastic tool upsetting and upsetting when closed mold. comparison of simulation and experiment measured load - displacement relationship can be seen in the plastic deformation of upsetting the first stage of lateral deformation of the workpiece in the axial loading process has been due to the elastic deformation of the mold radial constraint caused by the rapid increase in load; second stage axial pressure reducing mold springback so that the radial deformation of the workpiece can be restored, but with the increase of plastic strain occurs strengthen the work; the third phase of mold constraint lifted, increasing the radial dimension of the work with the constitutive model. calculation closed mold upsetting, showing the calculation results and the experimental results are consistent.

KW - finite deformation

KW - elastoplastic

KW - resilience

UR - http://www.oriprobe.com/journals/yylxxb.html

M3 - Article

VL - 22

SP - 180

EP - 183

JO - Chinese Journal of Applied Mechanics

T2 - Chinese Journal of Applied Mechanics

JF - Chinese Journal of Applied Mechanics

SN - 1000-4939

IS - 2

ER -