Some aspects about milling: expert system for cutting parameters selection and control designs

Luis Rubio, Manuel De la Sen, Asier Ibeas

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

Milling is a mechanical process which consist of the relative movement between feeding the work-piece and rotating the multitooth cutter, to remove material from the work-piece. Milling is used in industry for the manufacturing of mechanical components. During a operation static and dynamic effects can lead to undesared states, such as stick slip friction and forced and self-excited oscillations ). These oscillations, also called chatter oscillation, can culminate in non-smooth work-piece surface, inaccurate dimensions and excessive tool wear. The regenerative effect is the most widely recognized which causes chatter. Spindle speed selection or modulation and absorbers vibrations are the main solutions to supress chatter without reduce the productivity . But, the difficulties to introduce these techniques and the increasing competence lead to use intelligent techniques to evaluate process parameters, such as, time requeriments, programmed cutting parameters, machine tool selection and/or cuting tools selection .
The present document covers some aspects of the mentioned. First, an analytical guidance for description, detection and suppresion of chatter in milling system is given. Then, an expert system is proposed to select an adequate tool, among the available set, and cutting paramaters according to productivity, power compsumsion or availavility, and robustly stability against posible perturbations in the cutting parameters requeriments. The expert system suply an informatic tool to obtain cutting conditions independently of the machine operator, and it is also intended to be programmed by them. Once the cutting parameters has been selected, a control strategy is required. Thus, control of milling operations, and especially the adaptive control, has an extensive research in manufacture literature, since they reduce costs, save time and in general, protect the machine. Model reference adaptive control strategy is developed to program at Computer Numerically Controlled (CNC). A fractional order hold is proposed to discretize the modelled continuous system of the milling machine. The extra degree of freedom, , allow the programmer tuned this parameter to a better system response behavior, in comparison with a zero order hold typically used in literature.
LanguageEnglish
Title of host publicationAdvances Technologies
Subtitle of host publicationResearch, Development and Application
Place of PublicationGermany
Number of pages32
Publication statusPublished - 2006

Fingerprint

Milling (machining)
Expert systems
Productivity
Model reference adaptive control
Milling machines
Stick-slip
Machine tools
Modulation
Wear of materials
Friction
Costs
Industry

Keywords

  • milling
  • expert system
  • cutting parameters
  • control designs
  • mechanical process
  • multitooth cutter

Cite this

Rubio, L., De la Sen, M., & Ibeas, A. (2006). Some aspects about milling: expert system for cutting parameters selection and control designs. In Advances Technologies: Research, Development and Application Germany.
Rubio, Luis ; De la Sen, Manuel ; Ibeas, Asier . / Some aspects about milling : expert system for cutting parameters selection and control designs. Advances Technologies: Research, Development and Application . Germany, 2006.
@inbook{70b3154281ad4c85ab2009f0da3dbf8d,
title = "Some aspects about milling: expert system for cutting parameters selection and control designs",
abstract = "Milling is a mechanical process which consist of the relative movement between feeding the work-piece and rotating the multitooth cutter, to remove material from the work-piece. Milling is used in industry for the manufacturing of mechanical components. During a operation static and dynamic effects can lead to undesared states, such as stick slip friction and forced and self-excited oscillations ). These oscillations, also called chatter oscillation, can culminate in non-smooth work-piece surface, inaccurate dimensions and excessive tool wear. The regenerative effect is the most widely recognized which causes chatter. Spindle speed selection or modulation and absorbers vibrations are the main solutions to supress chatter without reduce the productivity . But, the difficulties to introduce these techniques and the increasing competence lead to use intelligent techniques to evaluate process parameters, such as, time requeriments, programmed cutting parameters, machine tool selection and/or cuting tools selection .The present document covers some aspects of the mentioned. First, an analytical guidance for description, detection and suppresion of chatter in milling system is given. Then, an expert system is proposed to select an adequate tool, among the available set, and cutting paramaters according to productivity, power compsumsion or availavility, and robustly stability against posible perturbations in the cutting parameters requeriments. The expert system suply an informatic tool to obtain cutting conditions independently of the machine operator, and it is also intended to be programmed by them. Once the cutting parameters has been selected, a control strategy is required. Thus, control of milling operations, and especially the adaptive control, has an extensive research in manufacture literature, since they reduce costs, save time and in general, protect the machine. Model reference adaptive control strategy is developed to program at Computer Numerically Controlled (CNC). A fractional order hold is proposed to discretize the modelled continuous system of the milling machine. The extra degree of freedom, , allow the programmer tuned this parameter to a better system response behavior, in comparison with a zero order hold typically used in literature.",
keywords = "milling, expert system , cutting parameters, control designs, mechanical process, multitooth cutter",
author = "Luis Rubio and {De la Sen}, Manuel and Asier Ibeas",
year = "2006",
language = "English",
isbn = "9783866111974",
booktitle = "Advances Technologies",

}

Rubio, L, De la Sen, M & Ibeas, A 2006, Some aspects about milling: expert system for cutting parameters selection and control designs. in Advances Technologies: Research, Development and Application . Germany.

Some aspects about milling : expert system for cutting parameters selection and control designs. / Rubio, Luis; De la Sen, Manuel; Ibeas, Asier .

Advances Technologies: Research, Development and Application . Germany, 2006.

Research output: Chapter in Book/Report/Conference proceedingChapter

TY - CHAP

T1 - Some aspects about milling

T2 - expert system for cutting parameters selection and control designs

AU - Rubio, Luis

AU - De la Sen, Manuel

AU - Ibeas, Asier

PY - 2006

Y1 - 2006

N2 - Milling is a mechanical process which consist of the relative movement between feeding the work-piece and rotating the multitooth cutter, to remove material from the work-piece. Milling is used in industry for the manufacturing of mechanical components. During a operation static and dynamic effects can lead to undesared states, such as stick slip friction and forced and self-excited oscillations ). These oscillations, also called chatter oscillation, can culminate in non-smooth work-piece surface, inaccurate dimensions and excessive tool wear. The regenerative effect is the most widely recognized which causes chatter. Spindle speed selection or modulation and absorbers vibrations are the main solutions to supress chatter without reduce the productivity . But, the difficulties to introduce these techniques and the increasing competence lead to use intelligent techniques to evaluate process parameters, such as, time requeriments, programmed cutting parameters, machine tool selection and/or cuting tools selection .The present document covers some aspects of the mentioned. First, an analytical guidance for description, detection and suppresion of chatter in milling system is given. Then, an expert system is proposed to select an adequate tool, among the available set, and cutting paramaters according to productivity, power compsumsion or availavility, and robustly stability against posible perturbations in the cutting parameters requeriments. The expert system suply an informatic tool to obtain cutting conditions independently of the machine operator, and it is also intended to be programmed by them. Once the cutting parameters has been selected, a control strategy is required. Thus, control of milling operations, and especially the adaptive control, has an extensive research in manufacture literature, since they reduce costs, save time and in general, protect the machine. Model reference adaptive control strategy is developed to program at Computer Numerically Controlled (CNC). A fractional order hold is proposed to discretize the modelled continuous system of the milling machine. The extra degree of freedom, , allow the programmer tuned this parameter to a better system response behavior, in comparison with a zero order hold typically used in literature.

AB - Milling is a mechanical process which consist of the relative movement between feeding the work-piece and rotating the multitooth cutter, to remove material from the work-piece. Milling is used in industry for the manufacturing of mechanical components. During a operation static and dynamic effects can lead to undesared states, such as stick slip friction and forced and self-excited oscillations ). These oscillations, also called chatter oscillation, can culminate in non-smooth work-piece surface, inaccurate dimensions and excessive tool wear. The regenerative effect is the most widely recognized which causes chatter. Spindle speed selection or modulation and absorbers vibrations are the main solutions to supress chatter without reduce the productivity . But, the difficulties to introduce these techniques and the increasing competence lead to use intelligent techniques to evaluate process parameters, such as, time requeriments, programmed cutting parameters, machine tool selection and/or cuting tools selection .The present document covers some aspects of the mentioned. First, an analytical guidance for description, detection and suppresion of chatter in milling system is given. Then, an expert system is proposed to select an adequate tool, among the available set, and cutting paramaters according to productivity, power compsumsion or availavility, and robustly stability against posible perturbations in the cutting parameters requeriments. The expert system suply an informatic tool to obtain cutting conditions independently of the machine operator, and it is also intended to be programmed by them. Once the cutting parameters has been selected, a control strategy is required. Thus, control of milling operations, and especially the adaptive control, has an extensive research in manufacture literature, since they reduce costs, save time and in general, protect the machine. Model reference adaptive control strategy is developed to program at Computer Numerically Controlled (CNC). A fractional order hold is proposed to discretize the modelled continuous system of the milling machine. The extra degree of freedom, , allow the programmer tuned this parameter to a better system response behavior, in comparison with a zero order hold typically used in literature.

KW - milling

KW - expert system

KW - cutting parameters

KW - control designs

KW - mechanical process

KW - multitooth cutter

M3 - Chapter

SN - 9783866111974

BT - Advances Technologies

CY - Germany

ER -

Rubio L, De la Sen M, Ibeas A. Some aspects about milling: expert system for cutting parameters selection and control designs. In Advances Technologies: Research, Development and Application . Germany. 2006