Smart manufacturing based on cyber-physical systems and beyond

Xifan Yao, Jiajun Zhou, Yingzi Lin, Yun Li, Hongnian Yu, Ying Liu

Research output: Contribution to journalArticle

12 Citations (Scopus)

Abstract

Cyber-physical systems (CPS) have gained an increasing attention recently for their immense potential towards the next generation smart systems that integrate cyber technology into the physical processes. However, CPS did not initiate either smart factories or smart manufacturing, and vice versa. Historically, the smart factory was initially studied with the introduction of the Internet of Things (IoT) in manufacturing, and later became a key part of Industry 4.0. Also emerging are other related models such as cloud manufacturing, social manufacturing and proactive manufacturing with the introduction of cloud computing (broadly, the Internet of Services, IoS), social networking (broadly, the Internet of People, IoP) and big data (broadly, the Internet of Content and Knowledge, IoCK), respectively. At present, there is a lack of a systemic and comprehensive study on the linkages and relations between these terms. Therefore, this study first presents a comprehensive survey and analysis of the CPS treated as a combination of the IoT and the IoS. Then, the paper addresses CPS-based smart manufacturing as an eight tuple of CPS,IoT, IoS and IoCK as elements. Further, the paper extends the eight-tuple CPS-based manufacturing to social-CPS (SCPS)-based manufacturing, termed wisdom manufacturing, which forms a nine tuple with the addition of one more element, the IoP and which is based on the SCPS instead of CPS. Both architectures and characteristics for smart and wisdom manufacturing are addressed. As such, these terms’ linkages are established and relations are clarified with a special discussion. This study thus contributes as a theoretical basis and as a comprehensive framework for emerging manufacturing integration.

LanguageEnglish
Pages1-13
Number of pages13
JournalJournal of Intelligent Manufacturing
Early online date28 Dec 2017
DOIs
Publication statusE-pub ahead of print - 28 Dec 2017

Fingerprint

Internet
Social networking (online)
Industrial plants
Cyber Physical System
Cloud computing
Internet of things
Industry
Big data

Keywords

  • CIMS
  • cyber-physical system
  • industry 4.0
  • smart manufacturing
  • socio-cyber-physical system
  • wisdom manufacturing

Cite this

Yao, Xifan ; Zhou, Jiajun ; Lin, Yingzi ; Li, Yun ; Yu, Hongnian ; Liu, Ying. / Smart manufacturing based on cyber-physical systems and beyond. In: Journal of Intelligent Manufacturing. 2017 ; pp. 1-13.
@article{66fabc201a1045c4a2a9fe27cc142d2c,
title = "Smart manufacturing based on cyber-physical systems and beyond",
abstract = "Cyber-physical systems (CPS) have gained an increasing attention recently for their immense potential towards the next generation smart systems that integrate cyber technology into the physical processes. However, CPS did not initiate either smart factories or smart manufacturing, and vice versa. Historically, the smart factory was initially studied with the introduction of the Internet of Things (IoT) in manufacturing, and later became a key part of Industry 4.0. Also emerging are other related models such as cloud manufacturing, social manufacturing and proactive manufacturing with the introduction of cloud computing (broadly, the Internet of Services, IoS), social networking (broadly, the Internet of People, IoP) and big data (broadly, the Internet of Content and Knowledge, IoCK), respectively. At present, there is a lack of a systemic and comprehensive study on the linkages and relations between these terms. Therefore, this study first presents a comprehensive survey and analysis of the CPS treated as a combination of the IoT and the IoS. Then, the paper addresses CPS-based smart manufacturing as an eight tuple of CPS,IoT, IoS and IoCK as elements. Further, the paper extends the eight-tuple CPS-based manufacturing to social-CPS (SCPS)-based manufacturing, termed wisdom manufacturing, which forms a nine tuple with the addition of one more element, the IoP and which is based on the SCPS instead of CPS. Both architectures and characteristics for smart and wisdom manufacturing are addressed. As such, these terms’ linkages are established and relations are clarified with a special discussion. This study thus contributes as a theoretical basis and as a comprehensive framework for emerging manufacturing integration.",
keywords = "CIMS, cyber-physical system, industry 4.0, smart manufacturing, socio-cyber-physical system, wisdom manufacturing",
author = "Xifan Yao and Jiajun Zhou and Yingzi Lin and Yun Li and Hongnian Yu and Ying Liu",
note = "This is a post-peer-review, pre-copyedit version of an article published in Journal of Intelligent Manufacturing. The final authenticated version is available online at: http://dx.doi.org/10.1007/s10845-017-1384-5.",
year = "2017",
month = "12",
day = "28",
doi = "10.1007/s10845-017-1384-5",
language = "English",
pages = "1--13",
journal = "Journal of Intelligent Manufacturing",
issn = "0956-5515",

}

Smart manufacturing based on cyber-physical systems and beyond. / Yao, Xifan; Zhou, Jiajun; Lin, Yingzi; Li, Yun; Yu, Hongnian; Liu, Ying.

In: Journal of Intelligent Manufacturing, 28.12.2017, p. 1-13.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Smart manufacturing based on cyber-physical systems and beyond

AU - Yao, Xifan

AU - Zhou, Jiajun

AU - Lin, Yingzi

AU - Li, Yun

AU - Yu, Hongnian

AU - Liu, Ying

N1 - This is a post-peer-review, pre-copyedit version of an article published in Journal of Intelligent Manufacturing. The final authenticated version is available online at: http://dx.doi.org/10.1007/s10845-017-1384-5.

PY - 2017/12/28

Y1 - 2017/12/28

N2 - Cyber-physical systems (CPS) have gained an increasing attention recently for their immense potential towards the next generation smart systems that integrate cyber technology into the physical processes. However, CPS did not initiate either smart factories or smart manufacturing, and vice versa. Historically, the smart factory was initially studied with the introduction of the Internet of Things (IoT) in manufacturing, and later became a key part of Industry 4.0. Also emerging are other related models such as cloud manufacturing, social manufacturing and proactive manufacturing with the introduction of cloud computing (broadly, the Internet of Services, IoS), social networking (broadly, the Internet of People, IoP) and big data (broadly, the Internet of Content and Knowledge, IoCK), respectively. At present, there is a lack of a systemic and comprehensive study on the linkages and relations between these terms. Therefore, this study first presents a comprehensive survey and analysis of the CPS treated as a combination of the IoT and the IoS. Then, the paper addresses CPS-based smart manufacturing as an eight tuple of CPS,IoT, IoS and IoCK as elements. Further, the paper extends the eight-tuple CPS-based manufacturing to social-CPS (SCPS)-based manufacturing, termed wisdom manufacturing, which forms a nine tuple with the addition of one more element, the IoP and which is based on the SCPS instead of CPS. Both architectures and characteristics for smart and wisdom manufacturing are addressed. As such, these terms’ linkages are established and relations are clarified with a special discussion. This study thus contributes as a theoretical basis and as a comprehensive framework for emerging manufacturing integration.

AB - Cyber-physical systems (CPS) have gained an increasing attention recently for their immense potential towards the next generation smart systems that integrate cyber technology into the physical processes. However, CPS did not initiate either smart factories or smart manufacturing, and vice versa. Historically, the smart factory was initially studied with the introduction of the Internet of Things (IoT) in manufacturing, and later became a key part of Industry 4.0. Also emerging are other related models such as cloud manufacturing, social manufacturing and proactive manufacturing with the introduction of cloud computing (broadly, the Internet of Services, IoS), social networking (broadly, the Internet of People, IoP) and big data (broadly, the Internet of Content and Knowledge, IoCK), respectively. At present, there is a lack of a systemic and comprehensive study on the linkages and relations between these terms. Therefore, this study first presents a comprehensive survey and analysis of the CPS treated as a combination of the IoT and the IoS. Then, the paper addresses CPS-based smart manufacturing as an eight tuple of CPS,IoT, IoS and IoCK as elements. Further, the paper extends the eight-tuple CPS-based manufacturing to social-CPS (SCPS)-based manufacturing, termed wisdom manufacturing, which forms a nine tuple with the addition of one more element, the IoP and which is based on the SCPS instead of CPS. Both architectures and characteristics for smart and wisdom manufacturing are addressed. As such, these terms’ linkages are established and relations are clarified with a special discussion. This study thus contributes as a theoretical basis and as a comprehensive framework for emerging manufacturing integration.

KW - CIMS

KW - cyber-physical system

KW - industry 4.0

KW - smart manufacturing

KW - socio-cyber-physical system

KW - wisdom manufacturing

UR - http://www.scopus.com/inward/record.url?scp=85039543349&partnerID=8YFLogxK

UR - https://link.springer.com/journal/10845

U2 - 10.1007/s10845-017-1384-5

DO - 10.1007/s10845-017-1384-5

M3 - Article

SP - 1

EP - 13

JO - Journal of Intelligent Manufacturing

T2 - Journal of Intelligent Manufacturing

JF - Journal of Intelligent Manufacturing

SN - 0956-5515

ER -