Selection of mill cutter and cutting parameters through an expert system

Luis Rubio; Manuel De la Sen

doi:10.1007/1-4020-5261-8_2

Selection of mill cutter and cutting parameters through an expert system

Luis Rubio, Manuel De la Sen

Design, Manufacturing And Engineering Management

Research output: Chapter in Book/Report/Conference proceeding › Chapter

1 Citation (Scopus)

Abstract

This paper discusses the selection of tools in milling operations. An expert system hinged on numerical methods has been developed to carry out this research. The knowledge base is given by limitations in process variables, which let us define the allowable cutting parameter space. The mentioned process variables cause instabilities due to tool-work-piece interaction, knowing as chatter vibration, and the power available in the spindle motor. Then, a tool cost model is contrived. It is used to choose the suitable cutting tool, among a known set of candidate available cutters. Once the cutting tool is selected, the cutting parameters are calculated. For this purpose, other two cost functions are designed, which are depended on the time and frequency domains response properties. An example is presented to illustrate the method.

Original language	English
Title of host publication	Advances in Computer, Information and Systems Sciences and Engineering
Subtitle of host publication	Proceedings of IETA 2005, TeNe 2005, EIAE 2005
Editors	Khaled Elleithy, Tarek Sobh, Ausif Mahmood, Magued Iskander, Mohammad Karim
Place of Publication	Netherlands
Publisher	Springer
Pages	5-12
Number of pages	8
ISBN (Print)	9781402052606
DOIs	https://doi.org/10.1007/1-4020-5261-8_2
Publication status	Published - 2006
Event	International Joint Conference on Computer, Information and Systems Sciences and Engineering (CISSE 2005) - University of Bridgeport, Bridgeport, United States Duration: 12 Dec 2013 → 14 Dec 2013

Conference

Conference	International Joint Conference on Computer, Information and Systems Sciences and Engineering (CISSE 2005)
Country/Territory	United States
City	Bridgeport
Period	12/12/13 → 14/12/13

Keywords

mill cutter
cutting parameters
expert system
milling operations

Access to Document

10.1007/1-4020-5261-8_2

Cite this

@inbook{68ea6ae4ff0e42d683d7d1bf648e5d60,

title = "Selection of mill cutter and cutting parameters through an expert system",

abstract = "This paper discusses the selection of tools in milling operations. An expert system hinged on numerical methods has been developed to carry out this research. The knowledge base is given by limitations in process variables, which let us define the allowable cutting parameter space. The mentioned process variables cause instabilities due to tool-work-piece interaction, knowing as chatter vibration, and the power available in the spindle motor. Then, a tool cost model is contrived. It is used to choose the suitable cutting tool, among a known set of candidate available cutters. Once the cutting tool is selected, the cutting parameters are calculated. For this purpose, other two cost functions are designed, which are depended on the time and frequency domains response properties. An example is presented to illustrate the method.",

keywords = "mill cutter, cutting parameters, expert system, milling operations",

author = "Luis Rubio and {De la Sen}, Manuel",

year = "2006",

doi = "10.1007/1-4020-5261-8_2",

language = "English",

isbn = "9781402052606",

pages = "5--12",

editor = "Elleithy, {Khaled } and Sobh, {Tarek } and Ausif Mahmood and Iskander, {Magued } and Karim, {Mohammad }",

booktitle = "Advances in Computer, Information and Systems Sciences and Engineering",

publisher = "Springer",

note = " International Joint Conference on Computer, Information and Systems Sciences and Engineering (CISSE 2005) ; Conference date: 12-12-2013 Through 14-12-2013",

}

Rubio, L & De la Sen, M 2006, Selection of mill cutter and cutting parameters through an expert system. in K Elleithy, T Sobh, A Mahmood, M Iskander & M Karim (eds), Advances in Computer, Information and Systems Sciences and Engineering: Proceedings of IETA 2005, TeNe 2005, EIAE 2005. Springer, Netherlands, pp. 5-12, International Joint Conference on Computer, Information and Systems Sciences and Engineering (CISSE 2005), Bridgeport, United States, 12/12/13. https://doi.org/10.1007/1-4020-5261-8_2

Selection of mill cutter and cutting parameters through an expert system. / Rubio, Luis; De la Sen, Manuel.
Advances in Computer, Information and Systems Sciences and Engineering: Proceedings of IETA 2005, TeNe 2005, EIAE 2005. ed. / Khaled Elleithy; Tarek Sobh; Ausif Mahmood; Magued Iskander; Mohammad Karim. Netherlands: Springer, 2006. p. 5-12.

Research output: Chapter in Book/Report/Conference proceeding › Chapter

TY - CHAP

T1 - Selection of mill cutter and cutting parameters through an expert system

AU - Rubio, Luis

AU - De la Sen, Manuel

PY - 2006

Y1 - 2006

N2 - This paper discusses the selection of tools in milling operations. An expert system hinged on numerical methods has been developed to carry out this research. The knowledge base is given by limitations in process variables, which let us define the allowable cutting parameter space. The mentioned process variables cause instabilities due to tool-work-piece interaction, knowing as chatter vibration, and the power available in the spindle motor. Then, a tool cost model is contrived. It is used to choose the suitable cutting tool, among a known set of candidate available cutters. Once the cutting tool is selected, the cutting parameters are calculated. For this purpose, other two cost functions are designed, which are depended on the time and frequency domains response properties. An example is presented to illustrate the method.

AB - This paper discusses the selection of tools in milling operations. An expert system hinged on numerical methods has been developed to carry out this research. The knowledge base is given by limitations in process variables, which let us define the allowable cutting parameter space. The mentioned process variables cause instabilities due to tool-work-piece interaction, knowing as chatter vibration, and the power available in the spindle motor. Then, a tool cost model is contrived. It is used to choose the suitable cutting tool, among a known set of candidate available cutters. Once the cutting tool is selected, the cutting parameters are calculated. For this purpose, other two cost functions are designed, which are depended on the time and frequency domains response properties. An example is presented to illustrate the method.

KW - mill cutter

KW - cutting parameters

KW - expert system

KW - milling operations

U2 - 10.1007/1-4020-5261-8_2

DO - 10.1007/1-4020-5261-8_2

M3 - Chapter

SN - 9781402052606

SP - 5

EP - 12

BT - Advances in Computer, Information and Systems Sciences and Engineering

A2 - Elleithy, Khaled

A2 - Sobh, Tarek

A2 - Mahmood, Ausif

A2 - Iskander, Magued

A2 - Karim, Mohammad

PB - Springer

CY - Netherlands

T2 - International Joint Conference on Computer, Information and Systems Sciences and Engineering (CISSE 2005)

Y2 - 12 December 2013 through 14 December 2013

ER -

Selection of mill cutter and cutting parameters through an expert system

Abstract

Conference

Keywords

Access to Document

Fingerprint

Cite this