Phased array ultrasonic method for robotic preload measurement in offshore wind turbine bolted connections

Research output: Contribution to journalArticlepeer-review

12 Downloads (Pure)

Abstract

This paper presents a novel approach for preload measurement of bolted connections, specifically tailored for offshore wind applications. The proposed method combines robotics, Phased Array Ultrasonic Testing (PAUT), nonlinear acoustoelasticity, and Finite Element Analysis (FEA). Acceptable defects, below a pre-defined size, are shown to have an impact on preload measurement, and therefore conducting simultaneous defect detection and preload measurement is discussed in this paper. The study demonstrates that even slight changes in the orientation of the ultrasonic transducer, the non-automated approach, can introduce a significant error of up to 140 MPa in bolt stress measurement and therefore a robotic approach is employed to achieve consistent and accurate measurements. Additionally, the study emphasises the significance of considering average preload for comparison with ultrasonic data, which is achieved through FEA simulations. The advantages of the proposed robotic PAUT method over single-element approaches are discussed, including the incorporation of nonlinearity, simultaneous defect detection and stress measurement, hardware and software adaptability, and notably, a substantial improvement in measurement accuracy. Based on the findings, the paper strongly recommends the adoption of the robotic PAUT approach for preload measurement, whilst acknowledging the required investment in hardware, software, and skilled personnel.
Original languageEnglish
Article number1421
Number of pages26
JournalSensors
Volume24
Issue number5
DOIs
Publication statusPublished - 22 Feb 2024

Keywords

  • ultrasonic stress measurement
  • phased array ultrasonic testing
  • offshore wind turbines
  • total focusing method
  • robotics
  • non-destructive testing

Fingerprint

Dive into the research topics of 'Phased array ultrasonic method for robotic preload measurement in offshore wind turbine bolted connections'. Together they form a unique fingerprint.

Cite this