Optimizing tool selection

T.C. Lim, J.R. Corney, J.M. Ritchie, D. Clark

Research output: Contribution to journalArticle

41 Citations (Scopus)

Abstract

Selecting optimal cutting tools that can answer to the performance criteria of manufacturing economics (quality, productivity, cost, etc) is an important step in planning the manufacture of components. Achieving this, however, is difficult because of the many constraints involved in the tool selection process. This paper describes a method for determining a theoretical optimal combination of cutting tools given a set of 3D volumes or 2D profiles. Optimal tools are selected by considering residual material that is inaccessible to oversized cutters and the relative clearance rates of cutters that can access these regions of the selected machining features. The current implementation described does not give exact results because several machining parameters have been ignored during the selection process, such as tool path length, plunge rates, etc. However, the experimental studies carried out to verify the theoretical results suggest that while these factors may influence the absolute values calculated, in general, their influence on the relative ranking of the tools is insignificant. The results presented here suggest that the 'correct' combination of tools could significantly reduce machining times. Consequently, the paper concludes with a discussion of how modifications to typical tool path generation routines in commercial CAM systems could improve productivity.
LanguageEnglish
Pages1239-1256
Number of pages17
JournalInternational Journal of Production Research
Volume39
Issue number6
DOIs
Publication statusPublished - 2001

Fingerprint

Machining
Cutting tools
Productivity
Computer aided manufacturing
Planning
Economics
Costs
Selection process

Keywords

  • electrical engineering
  • production
  • components
  • tools

Cite this

Lim, T.C. ; Corney, J.R. ; Ritchie, J.M. ; Clark, D. / Optimizing tool selection. In: International Journal of Production Research. 2001 ; Vol. 39, No. 6. pp. 1239-1256.
@article{e33d3d5c141c4715bd598ca23a1651a1,
title = "Optimizing tool selection",
abstract = "Selecting optimal cutting tools that can answer to the performance criteria of manufacturing economics (quality, productivity, cost, etc) is an important step in planning the manufacture of components. Achieving this, however, is difficult because of the many constraints involved in the tool selection process. This paper describes a method for determining a theoretical optimal combination of cutting tools given a set of 3D volumes or 2D profiles. Optimal tools are selected by considering residual material that is inaccessible to oversized cutters and the relative clearance rates of cutters that can access these regions of the selected machining features. The current implementation described does not give exact results because several machining parameters have been ignored during the selection process, such as tool path length, plunge rates, etc. However, the experimental studies carried out to verify the theoretical results suggest that while these factors may influence the absolute values calculated, in general, their influence on the relative ranking of the tools is insignificant. The results presented here suggest that the 'correct' combination of tools could significantly reduce machining times. Consequently, the paper concludes with a discussion of how modifications to typical tool path generation routines in commercial CAM systems could improve productivity.",
keywords = "electrical engineering, production, components, tools",
author = "T.C. Lim and J.R. Corney and J.M. Ritchie and D. Clark",
year = "2001",
doi = "10.1080/00207540010020063",
language = "English",
volume = "39",
pages = "1239--1256",
journal = "International Journal of Production Research",
issn = "0020-7543",
number = "6",

}

Optimizing tool selection. / Lim, T.C.; Corney, J.R.; Ritchie, J.M.; Clark, D.

In: International Journal of Production Research, Vol. 39, No. 6, 2001, p. 1239-1256.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Optimizing tool selection

AU - Lim, T.C.

AU - Corney, J.R.

AU - Ritchie, J.M.

AU - Clark, D.

PY - 2001

Y1 - 2001

N2 - Selecting optimal cutting tools that can answer to the performance criteria of manufacturing economics (quality, productivity, cost, etc) is an important step in planning the manufacture of components. Achieving this, however, is difficult because of the many constraints involved in the tool selection process. This paper describes a method for determining a theoretical optimal combination of cutting tools given a set of 3D volumes or 2D profiles. Optimal tools are selected by considering residual material that is inaccessible to oversized cutters and the relative clearance rates of cutters that can access these regions of the selected machining features. The current implementation described does not give exact results because several machining parameters have been ignored during the selection process, such as tool path length, plunge rates, etc. However, the experimental studies carried out to verify the theoretical results suggest that while these factors may influence the absolute values calculated, in general, their influence on the relative ranking of the tools is insignificant. The results presented here suggest that the 'correct' combination of tools could significantly reduce machining times. Consequently, the paper concludes with a discussion of how modifications to typical tool path generation routines in commercial CAM systems could improve productivity.

AB - Selecting optimal cutting tools that can answer to the performance criteria of manufacturing economics (quality, productivity, cost, etc) is an important step in planning the manufacture of components. Achieving this, however, is difficult because of the many constraints involved in the tool selection process. This paper describes a method for determining a theoretical optimal combination of cutting tools given a set of 3D volumes or 2D profiles. Optimal tools are selected by considering residual material that is inaccessible to oversized cutters and the relative clearance rates of cutters that can access these regions of the selected machining features. The current implementation described does not give exact results because several machining parameters have been ignored during the selection process, such as tool path length, plunge rates, etc. However, the experimental studies carried out to verify the theoretical results suggest that while these factors may influence the absolute values calculated, in general, their influence on the relative ranking of the tools is insignificant. The results presented here suggest that the 'correct' combination of tools could significantly reduce machining times. Consequently, the paper concludes with a discussion of how modifications to typical tool path generation routines in commercial CAM systems could improve productivity.

KW - electrical engineering

KW - production

KW - components

KW - tools

UR - http://dx.doi.org/10.1080/00207540010020063

U2 - 10.1080/00207540010020063

DO - 10.1080/00207540010020063

M3 - Article

VL - 39

SP - 1239

EP - 1256

JO - International Journal of Production Research

T2 - International Journal of Production Research

JF - International Journal of Production Research

SN - 0020-7543

IS - 6

ER -