Measurement of spindle error motions by an improved multi-probe method

Research output: Contribution to conferencePaper

Abstract

This paper proposes an improved multi-probe method for measurement of spindle error motions. Four degree of freedoms (DOFs) of error motions of a spindle are measured in a dedicated setup using capacitive sensors. Three sets of probe angle set are carefully selected in order to overcome the harmonic suppression problems commonly encountered in the multi-probe measurement approach. The error contribution of each set of angles is analysed and then the measurement results are modified in frequency domain so as to minimise the effect of harmonic suppression. The evaluation of measurement results shows that this method is effective and possesses good agreement with repeated measurements.

Conference

Conference12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance
CountryUnited Kingdom
CityWotton Under Edge
Period15/03/1716/03/17
Internet address

Fingerprint

Capacitive sensors

Keywords

  • degree of freedoms
  • spindle error motions
  • multi-probe method

Cite this

Ding, F., & Luo, X. (2017). Measurement of spindle error motions by an improved multi-probe method. 256-262. Paper presented at 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Wotton Under Edge, United Kingdom.
Ding, Fei ; Luo, Xichun. / Measurement of spindle error motions by an improved multi-probe method. Paper presented at 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Wotton Under Edge, United Kingdom.7 p.
@conference{7481b92da3a64c9d942127140148560e,
title = "Measurement of spindle error motions by an improved multi-probe method",
abstract = "This paper proposes an improved multi-probe method for measurement of spindle error motions. Four degree of freedoms (DOFs) of error motions of a spindle are measured in a dedicated setup using capacitive sensors. Three sets of probe angle set are carefully selected in order to overcome the harmonic suppression problems commonly encountered in the multi-probe measurement approach. The error contribution of each set of angles is analysed and then the measurement results are modified in frequency domain so as to minimise the effect of harmonic suppression. The evaluation of measurement results shows that this method is effective and possesses good agreement with repeated measurements.",
keywords = "degree of freedoms, spindle error motions, multi-probe method",
author = "Fei Ding and Xichun Luo",
year = "2017",
month = "3",
day = "16",
language = "English",
pages = "256--262",
note = "12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance ; Conference date: 15-03-2017 Through 16-03-2017",
url = "http://www.euspen.eu/events/lamdamap-12th-international-conference-exhibition/",

}

Ding, F & Luo, X 2017, 'Measurement of spindle error motions by an improved multi-probe method' Paper presented at 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Wotton Under Edge, United Kingdom, 15/03/17 - 16/03/17, pp. 256-262.

Measurement of spindle error motions by an improved multi-probe method. / Ding, Fei; Luo, Xichun.

2017. 256-262 Paper presented at 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Wotton Under Edge, United Kingdom.

Research output: Contribution to conferencePaper

TY - CONF

T1 - Measurement of spindle error motions by an improved multi-probe method

AU - Ding, Fei

AU - Luo, Xichun

PY - 2017/3/16

Y1 - 2017/3/16

N2 - This paper proposes an improved multi-probe method for measurement of spindle error motions. Four degree of freedoms (DOFs) of error motions of a spindle are measured in a dedicated setup using capacitive sensors. Three sets of probe angle set are carefully selected in order to overcome the harmonic suppression problems commonly encountered in the multi-probe measurement approach. The error contribution of each set of angles is analysed and then the measurement results are modified in frequency domain so as to minimise the effect of harmonic suppression. The evaluation of measurement results shows that this method is effective and possesses good agreement with repeated measurements.

AB - This paper proposes an improved multi-probe method for measurement of spindle error motions. Four degree of freedoms (DOFs) of error motions of a spindle are measured in a dedicated setup using capacitive sensors. Three sets of probe angle set are carefully selected in order to overcome the harmonic suppression problems commonly encountered in the multi-probe measurement approach. The error contribution of each set of angles is analysed and then the measurement results are modified in frequency domain so as to minimise the effect of harmonic suppression. The evaluation of measurement results shows that this method is effective and possesses good agreement with repeated measurements.

KW - degree of freedoms

KW - spindle error motions

KW - multi-probe method

UR - http://www.euspen.eu

M3 - Paper

SP - 256

EP - 262

ER -

Ding F, Luo X. Measurement of spindle error motions by an improved multi-probe method. 2017. Paper presented at 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Wotton Under Edge, United Kingdom.