Laser induced ultrasonic phased array using Full Matrix Capture data acquisition and Total Focusing Method

T. Stratoudaki, M. Clark, P. Wilcox

Research output: Chapter in Book/Report/Conference proceedingConference contribution book

1 Citation (Scopus)

Abstract

Laser based ultrasound is a technique where a short pulsed laser is used to generate ultrasound and optical interferometry is used in order to detect the signal. Since both generation and detection of ultrasound is based on optical means, the technique is broadband, non-contact, and couplant free, suitable for large stand-off distances, inspection of components of complex geometries and hazardous environments. A data collection method (Full Matrix Capture) developed for ultrasonic arrays, is used for data collected using laser based ultrasound. In this method, a signal is captured from every possible transmitter-receiver array element combination. After the data capture, the imaging is done in post processing using the Total Focusing Method, in which the beam is focused, in both transmission and reception, on every pixel in the image to achieve improved defect detectability and very high spatial resolution. For the first time in laser ultrasonics, the beamforming and steering of the ultrasound is done during the post processing. In this way, a synthesised 1-D laser induced ultrasonic array operates, in post processing, as a phased array without the need of complicated optical setups, optical fibres or use of multiple laser beams. This work presents results from a non destructive laser ultrasonic inspection of aluminium samples with side drilled holes and slots at depths varying between 5 and 20mm from the surface.

LanguageEnglish
Title of host publication54th Annual British Conference of Non-Destructive Testing, NDT 2015
Place of PublicationNorthamption
Pages56-65
Number of pages10
Publication statusPublished - 8 Sep 2015
Event54th Annual British Conference of Non-Destructive Testing, NDT 2015 - International Centre, Telford, United Kingdom
Duration: 8 Sep 201510 Sep 2015

Conference

Conference54th Annual British Conference of Non-Destructive Testing, NDT 2015
CountryUnited Kingdom
CityTelford
Period8/09/1510/09/15

Fingerprint

Data acquisition
Ultrasonics
Lasers
Processing
Inspection
Beamforming
Pulsed lasers
Transceivers
Interferometry
Laser beams
Optical fibers
Pixels
Aluminum
Imaging techniques
Defects
Geometry

Keywords

  • laser based ultrasound
  • short pulsed laser
  • optical interferometry
  • non-contact
  • full capture matirx
  • ultrasonic arrays
  • total focusing method
  • phased array

Cite this

Stratoudaki, T., Clark, M., & Wilcox, P. (2015). Laser induced ultrasonic phased array using Full Matrix Capture data acquisition and Total Focusing Method. In 54th Annual British Conference of Non-Destructive Testing, NDT 2015 (pp. 56-65). Northamption.
Stratoudaki, T. ; Clark, M. ; Wilcox, P. / Laser induced ultrasonic phased array using Full Matrix Capture data acquisition and Total Focusing Method. 54th Annual British Conference of Non-Destructive Testing, NDT 2015. Northamption, 2015. pp. 56-65
@inproceedings{aa185e10e03941298380f8acee8c277c,
title = "Laser induced ultrasonic phased array using Full Matrix Capture data acquisition and Total Focusing Method",
abstract = "Laser based ultrasound is a technique where a short pulsed laser is used to generate ultrasound and optical interferometry is used in order to detect the signal. Since both generation and detection of ultrasound is based on optical means, the technique is broadband, non-contact, and couplant free, suitable for large stand-off distances, inspection of components of complex geometries and hazardous environments. A data collection method (Full Matrix Capture) developed for ultrasonic arrays, is used for data collected using laser based ultrasound. In this method, a signal is captured from every possible transmitter-receiver array element combination. After the data capture, the imaging is done in post processing using the Total Focusing Method, in which the beam is focused, in both transmission and reception, on every pixel in the image to achieve improved defect detectability and very high spatial resolution. For the first time in laser ultrasonics, the beamforming and steering of the ultrasound is done during the post processing. In this way, a synthesised 1-D laser induced ultrasonic array operates, in post processing, as a phased array without the need of complicated optical setups, optical fibres or use of multiple laser beams. This work presents results from a non destructive laser ultrasonic inspection of aluminium samples with side drilled holes and slots at depths varying between 5 and 20mm from the surface.",
keywords = "laser based ultrasound, short pulsed laser, optical interferometry, non-contact, full capture matirx, ultrasonic arrays, total focusing method, phased array",
author = "T. Stratoudaki and M. Clark and P. Wilcox",
year = "2015",
month = "9",
day = "8",
language = "English",
isbn = "9781510813236",
pages = "56--65",
booktitle = "54th Annual British Conference of Non-Destructive Testing, NDT 2015",

}

Stratoudaki, T, Clark, M & Wilcox, P 2015, Laser induced ultrasonic phased array using Full Matrix Capture data acquisition and Total Focusing Method. in 54th Annual British Conference of Non-Destructive Testing, NDT 2015. Northamption, pp. 56-65, 54th Annual British Conference of Non-Destructive Testing, NDT 2015, Telford, United Kingdom, 8/09/15.

Laser induced ultrasonic phased array using Full Matrix Capture data acquisition and Total Focusing Method. / Stratoudaki, T.; Clark, M.; Wilcox, P.

54th Annual British Conference of Non-Destructive Testing, NDT 2015. Northamption, 2015. p. 56-65.

Research output: Chapter in Book/Report/Conference proceedingConference contribution book

TY - GEN

T1 - Laser induced ultrasonic phased array using Full Matrix Capture data acquisition and Total Focusing Method

AU - Stratoudaki, T.

AU - Clark, M.

AU - Wilcox, P.

PY - 2015/9/8

Y1 - 2015/9/8

N2 - Laser based ultrasound is a technique where a short pulsed laser is used to generate ultrasound and optical interferometry is used in order to detect the signal. Since both generation and detection of ultrasound is based on optical means, the technique is broadband, non-contact, and couplant free, suitable for large stand-off distances, inspection of components of complex geometries and hazardous environments. A data collection method (Full Matrix Capture) developed for ultrasonic arrays, is used for data collected using laser based ultrasound. In this method, a signal is captured from every possible transmitter-receiver array element combination. After the data capture, the imaging is done in post processing using the Total Focusing Method, in which the beam is focused, in both transmission and reception, on every pixel in the image to achieve improved defect detectability and very high spatial resolution. For the first time in laser ultrasonics, the beamforming and steering of the ultrasound is done during the post processing. In this way, a synthesised 1-D laser induced ultrasonic array operates, in post processing, as a phased array without the need of complicated optical setups, optical fibres or use of multiple laser beams. This work presents results from a non destructive laser ultrasonic inspection of aluminium samples with side drilled holes and slots at depths varying between 5 and 20mm from the surface.

AB - Laser based ultrasound is a technique where a short pulsed laser is used to generate ultrasound and optical interferometry is used in order to detect the signal. Since both generation and detection of ultrasound is based on optical means, the technique is broadband, non-contact, and couplant free, suitable for large stand-off distances, inspection of components of complex geometries and hazardous environments. A data collection method (Full Matrix Capture) developed for ultrasonic arrays, is used for data collected using laser based ultrasound. In this method, a signal is captured from every possible transmitter-receiver array element combination. After the data capture, the imaging is done in post processing using the Total Focusing Method, in which the beam is focused, in both transmission and reception, on every pixel in the image to achieve improved defect detectability and very high spatial resolution. For the first time in laser ultrasonics, the beamforming and steering of the ultrasound is done during the post processing. In this way, a synthesised 1-D laser induced ultrasonic array operates, in post processing, as a phased array without the need of complicated optical setups, optical fibres or use of multiple laser beams. This work presents results from a non destructive laser ultrasonic inspection of aluminium samples with side drilled holes and slots at depths varying between 5 and 20mm from the surface.

KW - laser based ultrasound

KW - short pulsed laser

KW - optical interferometry

KW - non-contact

KW - full capture matirx

KW - ultrasonic arrays

KW - total focusing method

KW - phased array

UR - http://www.scopus.com/inward/record.url?scp=84953774741&partnerID=8YFLogxK

M3 - Conference contribution book

SN - 9781510813236

SP - 56

EP - 65

BT - 54th Annual British Conference of Non-Destructive Testing, NDT 2015

CY - Northamption

ER -

Stratoudaki T, Clark M, Wilcox P. Laser induced ultrasonic phased array using Full Matrix Capture data acquisition and Total Focusing Method. In 54th Annual British Conference of Non-Destructive Testing, NDT 2015. Northamption. 2015. p. 56-65