Improved design of a novel PM disc motor by using soft magnetic composite material

G. Cvetkovski, L. Petkovska, M. Cundev, S. Gair

Research output: Contribution to journalArticle

26 Citations (Scopus)

Abstract

This paper will present some aspects of soft magnetic composite (SMC) material application in electrical machines. The stator cores of the prototype axial field permanent magnet disk motor (PMDM), which is under consideration, are made of wound strip cores. Two types of PMDM stators are analyzed: laminated and SMC material stators. The comparison analysis is based on the production complexity and the magnetic properties and calculated parameters. The magnetic parameters under consideration are the flux densities in various sections of the magnetic circuit and the iron losses in these sections. The values for both types of stators are calculated using finite-element-method (FEM) analysis. The production complexity and the values of the magnetic parameters are in favor of the SMC material stators in relation to the laminated stators.
LanguageEnglish
Pages3165-3167
Number of pages2
JournalIEEE Transactions on Magnetics
Volume38
Issue number5
DOIs
Publication statusPublished - 2002

Fingerprint

Magnetic materials
Stators
Composite materials
Permanent magnets
Magnetic circuits
Magnetic properties
Iron
Fluxes
Finite element method

Keywords

  • composite materials
  • finite element analysis
  • magnetic circuits
  • magnetic flux
  • stators

Cite this

Cvetkovski, G. ; Petkovska, L. ; Cundev, M. ; Gair, S. / Improved design of a novel PM disc motor by using soft magnetic composite material. In: IEEE Transactions on Magnetics. 2002 ; Vol. 38, No. 5. pp. 3165-3167.
@article{39cee7933eec47a5b7af2ecee1e52267,
title = "Improved design of a novel PM disc motor by using soft magnetic composite material",
abstract = "This paper will present some aspects of soft magnetic composite (SMC) material application in electrical machines. The stator cores of the prototype axial field permanent magnet disk motor (PMDM), which is under consideration, are made of wound strip cores. Two types of PMDM stators are analyzed: laminated and SMC material stators. The comparison analysis is based on the production complexity and the magnetic properties and calculated parameters. The magnetic parameters under consideration are the flux densities in various sections of the magnetic circuit and the iron losses in these sections. The values for both types of stators are calculated using finite-element-method (FEM) analysis. The production complexity and the values of the magnetic parameters are in favor of the SMC material stators in relation to the laminated stators.",
keywords = "composite materials, finite element analysis, magnetic circuits, magnetic flux, stators",
author = "G. Cvetkovski and L. Petkovska and M. Cundev and S. Gair",
year = "2002",
doi = "10.1109/TMAG.2002.802402",
language = "English",
volume = "38",
pages = "3165--3167",
journal = "IEEE Transactions on Magnetics",
issn = "0018-9464",
number = "5",

}

Improved design of a novel PM disc motor by using soft magnetic composite material. / Cvetkovski, G.; Petkovska, L.; Cundev, M.; Gair, S.

In: IEEE Transactions on Magnetics, Vol. 38, No. 5, 2002, p. 3165-3167.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Improved design of a novel PM disc motor by using soft magnetic composite material

AU - Cvetkovski, G.

AU - Petkovska, L.

AU - Cundev, M.

AU - Gair, S.

PY - 2002

Y1 - 2002

N2 - This paper will present some aspects of soft magnetic composite (SMC) material application in electrical machines. The stator cores of the prototype axial field permanent magnet disk motor (PMDM), which is under consideration, are made of wound strip cores. Two types of PMDM stators are analyzed: laminated and SMC material stators. The comparison analysis is based on the production complexity and the magnetic properties and calculated parameters. The magnetic parameters under consideration are the flux densities in various sections of the magnetic circuit and the iron losses in these sections. The values for both types of stators are calculated using finite-element-method (FEM) analysis. The production complexity and the values of the magnetic parameters are in favor of the SMC material stators in relation to the laminated stators.

AB - This paper will present some aspects of soft magnetic composite (SMC) material application in electrical machines. The stator cores of the prototype axial field permanent magnet disk motor (PMDM), which is under consideration, are made of wound strip cores. Two types of PMDM stators are analyzed: laminated and SMC material stators. The comparison analysis is based on the production complexity and the magnetic properties and calculated parameters. The magnetic parameters under consideration are the flux densities in various sections of the magnetic circuit and the iron losses in these sections. The values for both types of stators are calculated using finite-element-method (FEM) analysis. The production complexity and the values of the magnetic parameters are in favor of the SMC material stators in relation to the laminated stators.

KW - composite materials

KW - finite element analysis

KW - magnetic circuits

KW - magnetic flux

KW - stators

UR - http://dx.doi.org/10.1109/TMAG.2002.802402

U2 - 10.1109/TMAG.2002.802402

DO - 10.1109/TMAG.2002.802402

M3 - Article

VL - 38

SP - 3165

EP - 3167

JO - IEEE Transactions on Magnetics

T2 - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

SN - 0018-9464

IS - 5

ER -