Experimental investigation of the thermoelastic performance of an aerospace aluminium honeycomb composite panel

Research output: Contribution to journalArticle

Abstract

Aluminium composite sandwich panels are widely used to enhance the design of structures subjected to dynamic mechanical loading in thermally harsh environments. Spacecraft structures fall into this category because typical environmental conditions include combined and variable mechanical and thermal loading. Usually mechanical loadings arise as a consequence of localised structural dynamics and the thermal loadings are attributable principally to the effects of solar irradiation and eclipse during the vehicle’s orbit. Together these have the potential to influence satellite de-point in particular. Therefore, building a combined physics model which is representative of the thermal and mechanical loadings has emerged as an interesting and useful aim, which can be thought of as defining an important thermoelastic deformation problem in this application. The performance of such a structure loaded in this way could obviously be considered in the context of separate thermodynamic and mechanical interpretations. However, multiphysics modelling is currently in hand based on the premise that the pseudo-static thermal loadings and the mechanical loadings encountered in various operating environments are not necessarily decoupled processes, and this will be the subject of a separate publication. The analytical modelling fully represents both static and dynamic mechanical and thermal loading conditions.
It has become clear that predictive accuracy may be compromised by separation of the phenomena, at least without the introduction of a judicious correction factor. Therefore, in this paper an attempt has been made to identify experimentally the presence, and then to understand the attendant effects, of the coupling between the thermal and mechanical effects in an aluminium composite sandwich panel under test. The authors have performed a series of experiments on an aluminium honeycomb composite panel under three-point mechanical bending and controlled environmental temperature. The panel was subjected to a controllable, centrally located, very slowly increasing mechanical load in conjunction with thermal loading in the form of precisely controlled lowered and elevated environmental temperature. The tests were performed on a computer controlled Instron 8801 100 kN test machine for which the rate of change of applied mechanical load was automatically linked through feedback control to the rate of change of displacement. This ensured that the exact load-deflection profile can be obtained, even for materials with highly nonlinear characteristics. Both forms of loading have been shown to influence the displacement of the panel in significant ways, thereby confirming the importance of a combined physics approach.
Original languageEnglish
Article number113159
JournalComposite Structures
Publication statusAccepted/In press - 19 Oct 2020

Keywords

  • sandwich plate
  • honeycomb
  • thermomechanical
  • thermoelastic

Fingerprint Dive into the research topics of 'Experimental investigation of the thermoelastic performance of an aerospace aluminium honeycomb composite panel'. Together they form a unique fingerprint.

Cite this