Erratum: Mixing and flow-induced nanoprecipitation for morphology control of silk fibroin self-assembly

Saphia A. L. Matthew, Refaya Rezwan, Jirada Kaewchuchuen, Yvonne Perrie, F. Philipp Seib

Research output: Contribution to journalComment/debatepeer-review

15 Downloads (Pure)

Abstract

The authors regret that there were sub-?gure placement errors present in Fig. 4 and 5 of the main article. The sub-figure placement error in Fig. 4 was carried into Fig. S3, which shows additional statistical signi?cances. The corrected figures are shown below. Consequently, sections of the text in the manuscript should be adjusted according to this change, and these are detailed below: On page 7365, the sentence starting: “Under conditions of mixing induced nanoprecipitation in semi-batch format.”, should be given as “Under conditions of mixing-induced nanoprecipitation in semi-batch format at a 0.017 mL min-1 ?ow rate and 400 rpm stirring rate, increasing the silk concentration from 0.5 to 2 and 3% signi?cantly decreased the nanoparticle size (from 271 to 89 and 75 nm) and polydispersity index (from 0.47 to 0.23 and 0.13) (Fig. 4a and S3a). Significant decreases in the nanoparticle size (from 294 to 161 and 120 nm), polydispersity index (from 0.46 to 0.41 and 0.24) and zeta potential magnitude (from -39 and -40 to -30 mV) also occurred with a concentration increase from 0.5 to 2 and 3% when operating without stirring.” On page 7365 the sentence starting: “At the 400 rpm stirring rate.”, should be given as “At the 400 rpm stirring rate, moving from low to high shear by increasing the ?ow rate from 0.017 to 16.96 mL min-1 caused a significant increase in the nanoparticle size from 89 to 252 nm with 2% silk. The size distribution also significantly increased with flow rate at silk concentrations of 0.5 and 2%.” On page 730 the sentence starting: “For example, as the feed rate increased.” should be given as “For example, as the feed rate increased in the stirred semi-batch process for 2% silk feeds, the resulting assemblies increased in size and size distribution (Fig. 4a).” Accordingly, Fig. S3 in the original ESI should be replaced with the following revised Fig. S3. The ESI has been updated online to re?ect this change.

Original languageEnglish
Pages (from-to)25006-25009
Number of pages4
JournalRSC Advances
Volume12
Issue number38
Early online date7 Sept 2022
DOIs
Publication statusE-pub ahead of print - 7 Sept 2022

Keywords

  • general chemical engineeringq
  • silk fibroin
  • morphology

Fingerprint

Dive into the research topics of 'Erratum: Mixing and flow-induced nanoprecipitation for morphology control of silk fibroin self-assembly'. Together they form a unique fingerprint.

Cite this