Droplet formation in a T-shaped microfluidic junction

Haihu Liu, Yonghao Zhang

Research output: Contribution to journalArticle

110 Citations (Scopus)

Abstract

Using a phase-field model to describe fluid/fluid interfacial dynamics and a lattice Boltzmann model to address hydrodynamics, two dimensional (2D) numerical simulations have been performed to understand the mechanisms of droplet formation in microfluidic T-juntion. Although 2D simulations may not capture underlying physics quantitatively, our findings will help to clarify controversial experimental observations and identify new physical mechanisms. We have systematically examined the influence of capillary number, flow rate ratio, viscosity ratio, and contact angle in the droplet generation process. We clearly observe that the transition from the squeezing regime to the dripping regime occurs at a critical capillary number of 0.018, which is independent of flow rate ratio, viscosity ratio, and contact angle. In the squeezing regime, the squeezing pressure plays a dominant role in the droplet breakup process, which arises when the emerging interface obstructs the main channel. The droplet size depends on both the capillary number and the flow rate ratio, but is independent of the viscosity ratio under completely hydrophobic wetting conditions. In the dripping regime, the droplet size will be significantly influenced by the viscosity ratio as well as the built-up squeezing pressure. When the capillary number increases, the droplet size becomes less dependent on the flow rate ratio. The contact angle also affects the droplet shape, size, and detachment point, especially at small capillary numbers. More hydrophobic wetting properties are expected to produce smaller droplets. Interestingly, the droplet size is dependent on the viscosity ratio in the squeezing regime for less hydrophobic wetting conditions.
LanguageEnglish
Pages034906
Number of pages8
JournalJournal of Applied Physics
Volume106
Issue number3
DOIs
Publication statusPublished - 7 Aug 2009

Fingerprint

Microfluidics
compressing
viscosity
flow velocity
wetting
Viscosity
Flow rate
Contact angle
Wetting
fluids
detachment
emerging
simulation
hydrodynamics
Fluids
physics
Hydrodynamics
Physics
Computer simulation

Keywords

  • lattice boltzmann model
  • droplet formation
  • fluid dynamics
  • flow rate ratio
  • viscosity ratio
  • contact angle
  • capillary number

Cite this

@article{d836720c80c74e26a074ba1278a1da35,
title = "Droplet formation in a T-shaped microfluidic junction",
abstract = "Using a phase-field model to describe fluid/fluid interfacial dynamics and a lattice Boltzmann model to address hydrodynamics, two dimensional (2D) numerical simulations have been performed to understand the mechanisms of droplet formation in microfluidic T-juntion. Although 2D simulations may not capture underlying physics quantitatively, our findings will help to clarify controversial experimental observations and identify new physical mechanisms. We have systematically examined the influence of capillary number, flow rate ratio, viscosity ratio, and contact angle in the droplet generation process. We clearly observe that the transition from the squeezing regime to the dripping regime occurs at a critical capillary number of 0.018, which is independent of flow rate ratio, viscosity ratio, and contact angle. In the squeezing regime, the squeezing pressure plays a dominant role in the droplet breakup process, which arises when the emerging interface obstructs the main channel. The droplet size depends on both the capillary number and the flow rate ratio, but is independent of the viscosity ratio under completely hydrophobic wetting conditions. In the dripping regime, the droplet size will be significantly influenced by the viscosity ratio as well as the built-up squeezing pressure. When the capillary number increases, the droplet size becomes less dependent on the flow rate ratio. The contact angle also affects the droplet shape, size, and detachment point, especially at small capillary numbers. More hydrophobic wetting properties are expected to produce smaller droplets. Interestingly, the droplet size is dependent on the viscosity ratio in the squeezing regime for less hydrophobic wetting conditions.",
keywords = "lattice boltzmann model, droplet formation, fluid dynamics, flow rate ratio, viscosity ratio, contact angle, capillary number",
author = "Haihu Liu and Yonghao Zhang",
year = "2009",
month = "8",
day = "7",
doi = "10.1063/1.3187831",
language = "English",
volume = "106",
pages = "034906",
journal = "Journal of Applied Physics",
issn = "0021-8979",
number = "3",

}

Droplet formation in a T-shaped microfluidic junction. / Liu, Haihu; Zhang, Yonghao.

In: Journal of Applied Physics, Vol. 106, No. 3, 07.08.2009, p. 034906.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Droplet formation in a T-shaped microfluidic junction

AU - Liu, Haihu

AU - Zhang, Yonghao

PY - 2009/8/7

Y1 - 2009/8/7

N2 - Using a phase-field model to describe fluid/fluid interfacial dynamics and a lattice Boltzmann model to address hydrodynamics, two dimensional (2D) numerical simulations have been performed to understand the mechanisms of droplet formation in microfluidic T-juntion. Although 2D simulations may not capture underlying physics quantitatively, our findings will help to clarify controversial experimental observations and identify new physical mechanisms. We have systematically examined the influence of capillary number, flow rate ratio, viscosity ratio, and contact angle in the droplet generation process. We clearly observe that the transition from the squeezing regime to the dripping regime occurs at a critical capillary number of 0.018, which is independent of flow rate ratio, viscosity ratio, and contact angle. In the squeezing regime, the squeezing pressure plays a dominant role in the droplet breakup process, which arises when the emerging interface obstructs the main channel. The droplet size depends on both the capillary number and the flow rate ratio, but is independent of the viscosity ratio under completely hydrophobic wetting conditions. In the dripping regime, the droplet size will be significantly influenced by the viscosity ratio as well as the built-up squeezing pressure. When the capillary number increases, the droplet size becomes less dependent on the flow rate ratio. The contact angle also affects the droplet shape, size, and detachment point, especially at small capillary numbers. More hydrophobic wetting properties are expected to produce smaller droplets. Interestingly, the droplet size is dependent on the viscosity ratio in the squeezing regime for less hydrophobic wetting conditions.

AB - Using a phase-field model to describe fluid/fluid interfacial dynamics and a lattice Boltzmann model to address hydrodynamics, two dimensional (2D) numerical simulations have been performed to understand the mechanisms of droplet formation in microfluidic T-juntion. Although 2D simulations may not capture underlying physics quantitatively, our findings will help to clarify controversial experimental observations and identify new physical mechanisms. We have systematically examined the influence of capillary number, flow rate ratio, viscosity ratio, and contact angle in the droplet generation process. We clearly observe that the transition from the squeezing regime to the dripping regime occurs at a critical capillary number of 0.018, which is independent of flow rate ratio, viscosity ratio, and contact angle. In the squeezing regime, the squeezing pressure plays a dominant role in the droplet breakup process, which arises when the emerging interface obstructs the main channel. The droplet size depends on both the capillary number and the flow rate ratio, but is independent of the viscosity ratio under completely hydrophobic wetting conditions. In the dripping regime, the droplet size will be significantly influenced by the viscosity ratio as well as the built-up squeezing pressure. When the capillary number increases, the droplet size becomes less dependent on the flow rate ratio. The contact angle also affects the droplet shape, size, and detachment point, especially at small capillary numbers. More hydrophobic wetting properties are expected to produce smaller droplets. Interestingly, the droplet size is dependent on the viscosity ratio in the squeezing regime for less hydrophobic wetting conditions.

KW - lattice boltzmann model

KW - droplet formation

KW - fluid dynamics

KW - flow rate ratio

KW - viscosity ratio

KW - contact angle

KW - capillary number

U2 - 10.1063/1.3187831

DO - 10.1063/1.3187831

M3 - Article

VL - 106

SP - 034906

JO - Journal of Applied Physics

T2 - Journal of Applied Physics

JF - Journal of Applied Physics

SN - 0021-8979

IS - 3

ER -