Considering the impact of situation-specific motivations and constraints in the design of naturally ventilated and hybrid buildings

Hom B. Rijal, Paul Gerard Tuohy, Michael A. Humphreys, J. Fergus Nicol, Aizaz Samuel

Research output: Contribution to journalArticle

16 Citations (Scopus)

Abstract

A simple logical model of the interaction between a building and its occupants is presented based on the principle that if free to do so, people will adjust their posture, clothing or available building controls (windows, blinds, doors, fans, and thermostats) with the aim of achieving or restoring comfort and reducing discomfort. These adjustments are related to building design in two ways: first the freedom to adjust depends on the availability and ease-of-use of control options; second the use of controls affects building comfort and energy performance. Hence it is essential that these interactions are considered in the design process. The model captures occupant use of controls in response to thermal stimuli (too warm, too cold etc.) and non-thermal stimuli (e.g. desire for fresh air). The situation-specific motivations and constraints on control use are represented through trigger temperatures at which control actions occur, motivations are included as negative constraints and incorporated into a single constraint value describing the specifics of each situation. The values of constraints are quantified for a range of existing buildings in Europe and Pakistan. The integration of the model within a design flow is proposed and the impact of different levels of constraints demonstrated. It is proposed that to minimise energy use and maximise comfort in naturally ventilated and hybrid buildings the designer should take the following steps: 1. Provide unconstrained low energy adaptive control options where possible, 2. Avoid problems with indoor air quality which provide motivations for excessive ventilation rates, 3. Incorporate situation-specific adaptive behaviour of occupants in design simulations, 4. Analyse the robustness of designs against variations in patterns of use and climate, and 5. Incorporate appropriate comfort standards into the
operational building controls (e.g. BEMS).
LanguageEnglish
Pages35-48
JournalArchitectural Science Review
Volume55
Issue number1
DOIs
Publication statusPublished - Feb 2012

Fingerprint

Thermostats
Air quality
Fans
Ventilation
Availability
Air
Temperature
Hot Temperature

Keywords

  • thermal comfort
  • constraints
  • window
  • fan
  • adaptive algorithms
  • behaviour
  • simulation
  • natural ventilation
  • hybrid ventilation

Cite this

@article{f733f6c9e302451199f97922426c19c9,
title = "Considering the impact of situation-specific motivations and constraints in the design of naturally ventilated and hybrid buildings",
abstract = "A simple logical model of the interaction between a building and its occupants is presented based on the principle that if free to do so, people will adjust their posture, clothing or available building controls (windows, blinds, doors, fans, and thermostats) with the aim of achieving or restoring comfort and reducing discomfort. These adjustments are related to building design in two ways: first the freedom to adjust depends on the availability and ease-of-use of control options; second the use of controls affects building comfort and energy performance. Hence it is essential that these interactions are considered in the design process. The model captures occupant use of controls in response to thermal stimuli (too warm, too cold etc.) and non-thermal stimuli (e.g. desire for fresh air). The situation-specific motivations and constraints on control use are represented through trigger temperatures at which control actions occur, motivations are included as negative constraints and incorporated into a single constraint value describing the specifics of each situation. The values of constraints are quantified for a range of existing buildings in Europe and Pakistan. The integration of the model within a design flow is proposed and the impact of different levels of constraints demonstrated. It is proposed that to minimise energy use and maximise comfort in naturally ventilated and hybrid buildings the designer should take the following steps: 1. Provide unconstrained low energy adaptive control options where possible, 2. Avoid problems with indoor air quality which provide motivations for excessive ventilation rates, 3. Incorporate situation-specific adaptive behaviour of occupants in design simulations, 4. Analyse the robustness of designs against variations in patterns of use and climate, and 5. Incorporate appropriate comfort standards into the operational building controls (e.g. BEMS).",
keywords = "thermal comfort, constraints, window, fan, adaptive algorithms, behaviour, simulation, natural ventilation, hybrid ventilation",
author = "Rijal, {Hom B.} and Tuohy, {Paul Gerard} and Humphreys, {Michael A.} and Nicol, {J. Fergus} and Aizaz Samuel",
year = "2012",
month = "2",
doi = "10.1080/00038628.2011.641734",
language = "English",
volume = "55",
pages = "35--48",
journal = "Architectural Science Review",
issn = "0003-8628",
number = "1",

}

Considering the impact of situation-specific motivations and constraints in the design of naturally ventilated and hybrid buildings. / Rijal, Hom B.; Tuohy, Paul Gerard; Humphreys, Michael A.; Nicol, J. Fergus; Samuel, Aizaz.

In: Architectural Science Review, Vol. 55, No. 1, 02.2012, p. 35-48.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Considering the impact of situation-specific motivations and constraints in the design of naturally ventilated and hybrid buildings

AU - Rijal, Hom B.

AU - Tuohy, Paul Gerard

AU - Humphreys, Michael A.

AU - Nicol, J. Fergus

AU - Samuel, Aizaz

PY - 2012/2

Y1 - 2012/2

N2 - A simple logical model of the interaction between a building and its occupants is presented based on the principle that if free to do so, people will adjust their posture, clothing or available building controls (windows, blinds, doors, fans, and thermostats) with the aim of achieving or restoring comfort and reducing discomfort. These adjustments are related to building design in two ways: first the freedom to adjust depends on the availability and ease-of-use of control options; second the use of controls affects building comfort and energy performance. Hence it is essential that these interactions are considered in the design process. The model captures occupant use of controls in response to thermal stimuli (too warm, too cold etc.) and non-thermal stimuli (e.g. desire for fresh air). The situation-specific motivations and constraints on control use are represented through trigger temperatures at which control actions occur, motivations are included as negative constraints and incorporated into a single constraint value describing the specifics of each situation. The values of constraints are quantified for a range of existing buildings in Europe and Pakistan. The integration of the model within a design flow is proposed and the impact of different levels of constraints demonstrated. It is proposed that to minimise energy use and maximise comfort in naturally ventilated and hybrid buildings the designer should take the following steps: 1. Provide unconstrained low energy adaptive control options where possible, 2. Avoid problems with indoor air quality which provide motivations for excessive ventilation rates, 3. Incorporate situation-specific adaptive behaviour of occupants in design simulations, 4. Analyse the robustness of designs against variations in patterns of use and climate, and 5. Incorporate appropriate comfort standards into the operational building controls (e.g. BEMS).

AB - A simple logical model of the interaction between a building and its occupants is presented based on the principle that if free to do so, people will adjust their posture, clothing or available building controls (windows, blinds, doors, fans, and thermostats) with the aim of achieving or restoring comfort and reducing discomfort. These adjustments are related to building design in two ways: first the freedom to adjust depends on the availability and ease-of-use of control options; second the use of controls affects building comfort and energy performance. Hence it is essential that these interactions are considered in the design process. The model captures occupant use of controls in response to thermal stimuli (too warm, too cold etc.) and non-thermal stimuli (e.g. desire for fresh air). The situation-specific motivations and constraints on control use are represented through trigger temperatures at which control actions occur, motivations are included as negative constraints and incorporated into a single constraint value describing the specifics of each situation. The values of constraints are quantified for a range of existing buildings in Europe and Pakistan. The integration of the model within a design flow is proposed and the impact of different levels of constraints demonstrated. It is proposed that to minimise energy use and maximise comfort in naturally ventilated and hybrid buildings the designer should take the following steps: 1. Provide unconstrained low energy adaptive control options where possible, 2. Avoid problems with indoor air quality which provide motivations for excessive ventilation rates, 3. Incorporate situation-specific adaptive behaviour of occupants in design simulations, 4. Analyse the robustness of designs against variations in patterns of use and climate, and 5. Incorporate appropriate comfort standards into the operational building controls (e.g. BEMS).

KW - thermal comfort

KW - constraints

KW - window

KW - fan

KW - adaptive algorithms

KW - behaviour

KW - simulation

KW - natural ventilation

KW - hybrid ventilation

UR - http://www.scopus.com/inward/record.url?scp=84862017247&partnerID=8YFLogxK

U2 - 10.1080/00038628.2011.641734

DO - 10.1080/00038628.2011.641734

M3 - Article

VL - 55

SP - 35

EP - 48

JO - Architectural Science Review

T2 - Architectural Science Review

JF - Architectural Science Review

SN - 0003-8628

IS - 1

ER -