Asymmetric rolling of thin AA-5182 sheets: modelling and experiments

Saeed Tamimi, João P Correia, Augusto B Lopes, Said Ahzi, Frederic Barlat, Jose Gracio

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

The fundamental objective of the present work consists of the improvement of the plastic strain ratio (R-values) of AA-5182 aluminium alloy through improving the crystallographic texture by asymmetric rolling (ASR). The ASR process imposes intense shear deformation across the thickness of the sheet samples, leading to shear texture development. Finite element (FE) simulations of the ASR were first performed in order to investigate the impact of process parameters on the onset and growth of shear deformation throughout the thickness of sheet samples. In the present work, polycrystal simulations were also done to predict the texture evolutions and the mechanical response of the sheets deformed by different rolling processes. Afterwards, experimental studies were conducted. Conventional rolling (CR) as well as two types of ASR processes were carried out to reduce the thickness of the sheet samples. After each process, the rolled sheet samples were annealed. The crystallographic textures achieved in CR and ASR processes and annealing were measured. Furthermore, uniaxial tensile tests on the rolled sheets were also carried out in order to consider the effects of crystallographic texture on the macroscopic anisotropy. In agreement with the FE predictions, the experimental results showed that the shear strain spreads throughout the thickness of sheet samples during ASR and develops the shear texture. The mechanical behavior and texture evolution predicted by numerical models are in a good agreement with the experimental results. The modified texture leads to an increase of normal anisotropy as well as an increase of absolute value of planar anisotropy.
LanguageEnglish
Pages150-159
Number of pages9
JournalMaterials Science and Engineering: A
Volume603
DOIs
Publication statusPublished - 22 Feb 2014
Externally publishedYes

Fingerprint

Textures
textures
Experiments
shear
Anisotropy
Shear deformation
anisotropy
Shear strain
Polycrystals
shear strain
polycrystals
tensile tests
Numerical models
Aluminum alloys
Plastic deformation
aluminum alloys
Annealing
plastics
simulation
annealing

Keywords

  • asymmetric rolling
  • aluminium magnesium alloy
  • shear texture
  • polycrystal simulations
  • finite element analysis

Cite this

Tamimi, Saeed ; Correia, João P ; B Lopes, Augusto ; Ahzi, Said ; Barlat, Frederic ; Gracio, Jose. / Asymmetric rolling of thin AA-5182 sheets : modelling and experiments. In: Materials Science and Engineering: A. 2014 ; Vol. 603. pp. 150-159.
@article{4e3884d7d86a4e2ea2a5949d0f295121,
title = "Asymmetric rolling of thin AA-5182 sheets: modelling and experiments",
abstract = "The fundamental objective of the present work consists of the improvement of the plastic strain ratio (R-values) of AA-5182 aluminium alloy through improving the crystallographic texture by asymmetric rolling (ASR). The ASR process imposes intense shear deformation across the thickness of the sheet samples, leading to shear texture development. Finite element (FE) simulations of the ASR were first performed in order to investigate the impact of process parameters on the onset and growth of shear deformation throughout the thickness of sheet samples. In the present work, polycrystal simulations were also done to predict the texture evolutions and the mechanical response of the sheets deformed by different rolling processes. Afterwards, experimental studies were conducted. Conventional rolling (CR) as well as two types of ASR processes were carried out to reduce the thickness of the sheet samples. After each process, the rolled sheet samples were annealed. The crystallographic textures achieved in CR and ASR processes and annealing were measured. Furthermore, uniaxial tensile tests on the rolled sheets were also carried out in order to consider the effects of crystallographic texture on the macroscopic anisotropy. In agreement with the FE predictions, the experimental results showed that the shear strain spreads throughout the thickness of sheet samples during ASR and develops the shear texture. The mechanical behavior and texture evolution predicted by numerical models are in a good agreement with the experimental results. The modified texture leads to an increase of normal anisotropy as well as an increase of absolute value of planar anisotropy.",
keywords = "asymmetric rolling, aluminium magnesium alloy, shear texture, polycrystal simulations, finite element analysis",
author = "Saeed Tamimi and Correia, {Jo{\~a}o P} and {B Lopes}, Augusto and Said Ahzi and Frederic Barlat and Jose Gracio",
year = "2014",
month = "2",
day = "22",
doi = "10.1016/j.msea.2014.02.048",
language = "English",
volume = "603",
pages = "150--159",
journal = "Materials Science and Engineering: A",
issn = "0921-5093",

}

Asymmetric rolling of thin AA-5182 sheets : modelling and experiments. / Tamimi, Saeed; Correia, João P; B Lopes, Augusto; Ahzi, Said ; Barlat, Frederic ; Gracio, Jose.

In: Materials Science and Engineering: A, Vol. 603, 22.02.2014, p. 150-159.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Asymmetric rolling of thin AA-5182 sheets

T2 - Materials Science and Engineering: A

AU - Tamimi, Saeed

AU - Correia, João P

AU - B Lopes, Augusto

AU - Ahzi, Said

AU - Barlat, Frederic

AU - Gracio, Jose

PY - 2014/2/22

Y1 - 2014/2/22

N2 - The fundamental objective of the present work consists of the improvement of the plastic strain ratio (R-values) of AA-5182 aluminium alloy through improving the crystallographic texture by asymmetric rolling (ASR). The ASR process imposes intense shear deformation across the thickness of the sheet samples, leading to shear texture development. Finite element (FE) simulations of the ASR were first performed in order to investigate the impact of process parameters on the onset and growth of shear deformation throughout the thickness of sheet samples. In the present work, polycrystal simulations were also done to predict the texture evolutions and the mechanical response of the sheets deformed by different rolling processes. Afterwards, experimental studies were conducted. Conventional rolling (CR) as well as two types of ASR processes were carried out to reduce the thickness of the sheet samples. After each process, the rolled sheet samples were annealed. The crystallographic textures achieved in CR and ASR processes and annealing were measured. Furthermore, uniaxial tensile tests on the rolled sheets were also carried out in order to consider the effects of crystallographic texture on the macroscopic anisotropy. In agreement with the FE predictions, the experimental results showed that the shear strain spreads throughout the thickness of sheet samples during ASR and develops the shear texture. The mechanical behavior and texture evolution predicted by numerical models are in a good agreement with the experimental results. The modified texture leads to an increase of normal anisotropy as well as an increase of absolute value of planar anisotropy.

AB - The fundamental objective of the present work consists of the improvement of the plastic strain ratio (R-values) of AA-5182 aluminium alloy through improving the crystallographic texture by asymmetric rolling (ASR). The ASR process imposes intense shear deformation across the thickness of the sheet samples, leading to shear texture development. Finite element (FE) simulations of the ASR were first performed in order to investigate the impact of process parameters on the onset and growth of shear deformation throughout the thickness of sheet samples. In the present work, polycrystal simulations were also done to predict the texture evolutions and the mechanical response of the sheets deformed by different rolling processes. Afterwards, experimental studies were conducted. Conventional rolling (CR) as well as two types of ASR processes were carried out to reduce the thickness of the sheet samples. After each process, the rolled sheet samples were annealed. The crystallographic textures achieved in CR and ASR processes and annealing were measured. Furthermore, uniaxial tensile tests on the rolled sheets were also carried out in order to consider the effects of crystallographic texture on the macroscopic anisotropy. In agreement with the FE predictions, the experimental results showed that the shear strain spreads throughout the thickness of sheet samples during ASR and develops the shear texture. The mechanical behavior and texture evolution predicted by numerical models are in a good agreement with the experimental results. The modified texture leads to an increase of normal anisotropy as well as an increase of absolute value of planar anisotropy.

KW - asymmetric rolling

KW - aluminium magnesium alloy

KW - shear texture

KW - polycrystal simulations

KW - finite element analysis

U2 - 10.1016/j.msea.2014.02.048

DO - 10.1016/j.msea.2014.02.048

M3 - Article

VL - 603

SP - 150

EP - 159

JO - Materials Science and Engineering: A

JF - Materials Science and Engineering: A

SN - 0921-5093

ER -