Analysis and selection of appropriate components for power system metrology instruments

Research output: Chapter in Book/Report/Conference proceedingConference contribution book

Abstract

Modern and future power systems require accurate measurements for a wide range of applications such as control, protection, and electrical energy consumption billing. The overall accuracy of measured electrical quantities depends on individual error contributions from different stages of the signal path within the measurement instrument, as well as power quality conditions of the grid. Present developments in hardware and signal processing techniques allow accurate measurements of voltage and current signals in almost any possible scenario. Nevertheless, in order to achieve the required level of accuracy, considerations should be given when choosing components for the different stages of the measuring instrument design. In this paper, a review and analysis of some of the most common hardware components and signal processing techniques is presented. Recommendations are given to provide practical guidance for developing power system measurement devices, which focus on the applications of electrical energy metering and phasor measurement units.
LanguageEnglish
Title of host publication2019 2nd International Colloquium on Smart Grid Metrology, SMAGRIMET 2019 - Proceedings
EditorsGoran Petrovic, Branimir Ivsic, Martin Dadic
Place of PublicationPiscataway, N.J.
PublisherIEEE
Number of pages6
ISBN (Electronic)978-953-184-246-4
ISBN (Print)978-1-7281-1966-3
DOIs
Publication statusPublished - 23 May 2019
EventSecond International Colloquium on Smart Grid Metrology - Radisson Blu Resort & Spa, Split., Split, Croatia
Duration: 9 Mar 201912 Mar 2019
Conference number: 46245XP
https://smagrimet.org/

Conference

ConferenceSecond International Colloquium on Smart Grid Metrology
Abbreviated titleSmaGriMet 2019
CountryCroatia
CitySplit
Period9/03/1912/03/19
Internet address

Fingerprint

Signal processing
Electric power system measurement
Hardware
Phasor measurement units
Power quality
Energy utilization
Electric potential

Keywords

  • electrical measurements
  • phasor measurement unit
  • analogue front-end
  • power quality

Cite this

Quijano Cetina, R., Seferi, Y., Blair, S. M., & Wright, P. S. (2019). Analysis and selection of appropriate components for power system metrology instruments. In G. Petrovic, B. Ivsic, & M. Dadic (Eds.), 2019 2nd International Colloquium on Smart Grid Metrology, SMAGRIMET 2019 - Proceedings Piscataway, N.J.: IEEE. https://doi.org/10.23919/SMAGRIMET.2019.8720362
Quijano Cetina, R. ; Seferi, Yljon ; Blair, Steven M. ; Wright, Paul S. / Analysis and selection of appropriate components for power system metrology instruments. 2019 2nd International Colloquium on Smart Grid Metrology, SMAGRIMET 2019 - Proceedings. editor / Goran Petrovic ; Branimir Ivsic ; Martin Dadic. Piscataway, N.J. : IEEE, 2019.
@inproceedings{c80a4cbfe5e44794bf45682870ee2070,
title = "Analysis and selection of appropriate components for power system metrology instruments",
abstract = "Modern and future power systems require accurate measurements for a wide range of applications such as control, protection, and electrical energy consumption billing. The overall accuracy of measured electrical quantities depends on individual error contributions from different stages of the signal path within the measurement instrument, as well as power quality conditions of the grid. Present developments in hardware and signal processing techniques allow accurate measurements of voltage and current signals in almost any possible scenario. Nevertheless, in order to achieve the required level of accuracy, considerations should be given when choosing components for the different stages of the measuring instrument design. In this paper, a review and analysis of some of the most common hardware components and signal processing techniques is presented. Recommendations are given to provide practical guidance for developing power system measurement devices, which focus on the applications of electrical energy metering and phasor measurement units.",
keywords = "electrical measurements, phasor measurement unit, analogue front-end, power quality",
author = "{Quijano Cetina}, R. and Yljon Seferi and Blair, {Steven M.} and Wright, {Paul S.}",
year = "2019",
month = "5",
day = "23",
doi = "10.23919/SMAGRIMET.2019.8720362",
language = "English",
isbn = "978-1-7281-1966-3",
editor = "Goran Petrovic and Branimir Ivsic and Martin Dadic",
booktitle = "2019 2nd International Colloquium on Smart Grid Metrology, SMAGRIMET 2019 - Proceedings",
publisher = "IEEE",

}

Quijano Cetina, R, Seferi, Y, Blair, SM & Wright, PS 2019, Analysis and selection of appropriate components for power system metrology instruments. in G Petrovic, B Ivsic & M Dadic (eds), 2019 2nd International Colloquium on Smart Grid Metrology, SMAGRIMET 2019 - Proceedings. IEEE, Piscataway, N.J., Second International Colloquium on Smart Grid Metrology, Split, Croatia, 9/03/19. https://doi.org/10.23919/SMAGRIMET.2019.8720362

Analysis and selection of appropriate components for power system metrology instruments. / Quijano Cetina, R.; Seferi, Yljon; Blair, Steven M.; Wright, Paul S.

2019 2nd International Colloquium on Smart Grid Metrology, SMAGRIMET 2019 - Proceedings. ed. / Goran Petrovic; Branimir Ivsic; Martin Dadic. Piscataway, N.J. : IEEE, 2019.

Research output: Chapter in Book/Report/Conference proceedingConference contribution book

TY - GEN

T1 - Analysis and selection of appropriate components for power system metrology instruments

AU - Quijano Cetina, R.

AU - Seferi, Yljon

AU - Blair, Steven M.

AU - Wright, Paul S.

PY - 2019/5/23

Y1 - 2019/5/23

N2 - Modern and future power systems require accurate measurements for a wide range of applications such as control, protection, and electrical energy consumption billing. The overall accuracy of measured electrical quantities depends on individual error contributions from different stages of the signal path within the measurement instrument, as well as power quality conditions of the grid. Present developments in hardware and signal processing techniques allow accurate measurements of voltage and current signals in almost any possible scenario. Nevertheless, in order to achieve the required level of accuracy, considerations should be given when choosing components for the different stages of the measuring instrument design. In this paper, a review and analysis of some of the most common hardware components and signal processing techniques is presented. Recommendations are given to provide practical guidance for developing power system measurement devices, which focus on the applications of electrical energy metering and phasor measurement units.

AB - Modern and future power systems require accurate measurements for a wide range of applications such as control, protection, and electrical energy consumption billing. The overall accuracy of measured electrical quantities depends on individual error contributions from different stages of the signal path within the measurement instrument, as well as power quality conditions of the grid. Present developments in hardware and signal processing techniques allow accurate measurements of voltage and current signals in almost any possible scenario. Nevertheless, in order to achieve the required level of accuracy, considerations should be given when choosing components for the different stages of the measuring instrument design. In this paper, a review and analysis of some of the most common hardware components and signal processing techniques is presented. Recommendations are given to provide practical guidance for developing power system measurement devices, which focus on the applications of electrical energy metering and phasor measurement units.

KW - electrical measurements

KW - phasor measurement unit

KW - analogue front-end

KW - power quality

UR - https://smagrimet.org/

U2 - 10.23919/SMAGRIMET.2019.8720362

DO - 10.23919/SMAGRIMET.2019.8720362

M3 - Conference contribution book

SN - 978-1-7281-1966-3

BT - 2019 2nd International Colloquium on Smart Grid Metrology, SMAGRIMET 2019 - Proceedings

A2 - Petrovic, Goran

A2 - Ivsic, Branimir

A2 - Dadic, Martin

PB - IEEE

CY - Piscataway, N.J.

ER -

Quijano Cetina R, Seferi Y, Blair SM, Wright PS. Analysis and selection of appropriate components for power system metrology instruments. In Petrovic G, Ivsic B, Dadic M, editors, 2019 2nd International Colloquium on Smart Grid Metrology, SMAGRIMET 2019 - Proceedings. Piscataway, N.J.: IEEE. 2019 https://doi.org/10.23919/SMAGRIMET.2019.8720362