A similar to 10kW W-Band Gyro-BWO using a Helically Corrugated Waveguide

C. R. Donaldson; W. He; A.D.R. Phelps; F.P. Li; A.W. Cross; K. Ronald

A similar to 10kW W-Band Gyro-BWO using a Helically Corrugated Waveguide

C. R. Donaldson, W. He, A.D.R. Phelps, F.P. Li, A.W. Cross, K. Ronald

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Abstract

Presented in this paper are the results of a 10kW W-Band Gyro-BWO based on a helically corrugated interaction region and novel cusp electron gun. Microwave measurements of the helically corrugated interaction region are shown to give a low loss of similar to 1dB over the frequency region of interest (84-104 GHz). The measured dispersion was found in good agreement with the analytically calculated and numerically simulated dispersions. The design and simulation results of the cusp electron gun of the Gyro-BWO device are given in this paper.

Original language	English
Title of host publication	: 33rd International Conference on Infrared, Millimeter and Terahertz Waves
Place of Publication	Pasedena, California.
Publisher	IEEE
Pages	201-202
Number of pages	1
Volume	I & II
ISBN (Print)	978-1-4244-2119-0
Publication status	Published - 2008

Keywords

infrared
millimeter waves
terahertz waves

2 Finished

Compression of frequency modulated pulses using a high order helically corrugated waveguide
Cross, A., Phelps, A., Ronald, K. & Zhang, L.
EPSRC (Engineering and Physical Sciences Research Council)
1/10/06 → 30/09/10
Project: Research
Wave dispersion measurement of helically corrugated waveguides using Vector Network Analyser
Phelps, A., Cross, A., Ronald, K. & Whyte, C.
EPSRC (Engineering and Physical Sciences Research Council)
1/10/05 → 28/02/09
Project: Research

2 Conference contribution book

Microwave pulse compression using helically corrugated waveguides
Young, A., Ronald, K., Macinnes, P., Whyte, C., Burt, G., He, W., Konoplev, I., Phelps, A., Cross, A., Samsonov, S. V., Bratman, V. L. & Denisov, G. G., 2006, 2006 IEEE International vacuum electronics conference held jointly with 2006 IEEE international vacuum electron sources . New York: IEEE, p. 555-556 (IEEE International Vacuum Electronics Conference IVEC ).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution book
W-band Gyro-BWO based on a helically corrugated waveguide
He, W., Donaldson, C., Phelps, A., Cross, A. & Ronald, K., 2006, Conference digest of the 2006 joint 31st international conference on infrared and millimeter waves and 14th international conference on terahertz electronics. Shen, XC., Lu, W., Zhang, J. & Dou, WB. (eds.). New York: IEEE, p. 88-88 1 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution book

2 Citations (Scopus)

Cite this

@inbook{564b8efb2971444cb7aa5ff27f402155,

title = "A similar to 10kW W-Band Gyro-BWO using a Helically Corrugated Waveguide",

abstract = "Presented in this paper are the results of a 10kW W-Band Gyro-BWO based on a helically corrugated interaction region and novel cusp electron gun. Microwave measurements of the helically corrugated interaction region are shown to give a low loss of similar to 1dB over the frequency region of interest (84-104 GHz). The measured dispersion was found in good agreement with the analytically calculated and numerically simulated dispersions. The design and simulation results of the cusp electron gun of the Gyro-BWO device are given in this paper.",

keywords = "infrared, millimeter waves, terahertz waves",

author = "Donaldson, {C. R.} and W. He and A.D.R. Phelps and F.P. Li and A.W. Cross and K. Ronald",

year = "2008",

language = "English",

isbn = "978-1-4244-2119-0",

volume = "I & II",

pages = "201--202",

booktitle = ": 33rd International Conference on Infrared, Millimeter and Terahertz Waves",

publisher = "IEEE",

}

TY - CHAP

T1 - A similar to 10kW W-Band Gyro-BWO using a Helically Corrugated Waveguide

AU - Donaldson, C. R.

AU - He, W.

AU - Phelps, A.D.R.

AU - Li, F.P.

AU - Cross, A.W.

AU - Ronald, K.

PY - 2008

Y1 - 2008

N2 - Presented in this paper are the results of a 10kW W-Band Gyro-BWO based on a helically corrugated interaction region and novel cusp electron gun. Microwave measurements of the helically corrugated interaction region are shown to give a low loss of similar to 1dB over the frequency region of interest (84-104 GHz). The measured dispersion was found in good agreement with the analytically calculated and numerically simulated dispersions. The design and simulation results of the cusp electron gun of the Gyro-BWO device are given in this paper.

AB - Presented in this paper are the results of a 10kW W-Band Gyro-BWO based on a helically corrugated interaction region and novel cusp electron gun. Microwave measurements of the helically corrugated interaction region are shown to give a low loss of similar to 1dB over the frequency region of interest (84-104 GHz). The measured dispersion was found in good agreement with the analytically calculated and numerically simulated dispersions. The design and simulation results of the cusp electron gun of the Gyro-BWO device are given in this paper.

KW - infrared

KW - millimeter waves

KW - terahertz waves

M3 - Chapter

SN - 978-1-4244-2119-0

VL - I & II

SP - 201

EP - 202

BT - : 33rd International Conference on Infrared, Millimeter and Terahertz Waves

PB - IEEE

CY - Pasedena, California.

ER -

A similar to 10kW W-Band Gyro-BWO using a Helically Corrugated Waveguide

Abstract

Keywords

Compression of frequency modulated pulses using a high order helically corrugated waveguide

Wave dispersion measurement of helically corrugated waveguides using Vector Network Analyser

Microwave pulse compression using helically corrugated waveguides

W-band Gyro-BWO based on a helically corrugated waveguide

Cite this