A method for distinguishing between complex transient signals in condition monitoring applications

Tanya Pinpart, Graeme West, Stuart Galloway, Martin Judd

Research output: Contribution to conferencePaper

9 Citations (Scopus)

Abstract

Partial discharges (PDs) are a cause of concern in power systems. Many detection methods and analysis techniques for PDs are available, such as UHF detection, conventional IEC 60270 method, acoustic detection, etc. This paper focuses on analysing signals obtained by the UHF method in order to distinguish between different sources of PD. Two methods based on the frequency and time characteristics are investigated with the aim of testing PD recognition based on the calculation of similarity or difference of two UHF signals. It has previously been shown that PDs can be recognized by a similarity function based on a time-frequency representation constructed using a wavelet transform. However, this is a computationally intensive process that needs to be simplified for practical implementation. Two new approaches are investigated in this paper. The first method uses spectrogram analysis to represent the UHF signal in terms of time, frequency and amplitude, from which a few key features can be extracted. The second method uses a smoothing kernel to capture the envelope of the UHF signal, effectively reducing the quantity of data to be analysed. The results from the two methods of comparing PD signals are discussed to determine their ability to measure similarity, while the results of non-PD signals are compared to show the different behaviours between PD and non-PD signals.

Conference

ConferenceFifth International Conference on Condition Monitoring and Machine Failure Prevention Technologies
CityEdinburgh, UK
Period15/07/0818/07/08

Fingerprint

Partial discharges
Condition monitoring
Wavelet transforms
Acoustics
Testing

Keywords

  • transient signals
  • machine failure
  • prevention technologies

Cite this

Pinpart, T., West, G., Galloway, S., & Judd, M. (2008). A method for distinguishing between complex transient signals in condition monitoring applications. 1060–1064. Paper presented at Fifth International Conference on Condition Monitoring and Machine Failure Prevention Technologies, Edinburgh, UK, . https://doi.org/10.1109/CMD.2008.4580465
Pinpart, Tanya ; West, Graeme ; Galloway, Stuart ; Judd, Martin. / A method for distinguishing between complex transient signals in condition monitoring applications. Paper presented at Fifth International Conference on Condition Monitoring and Machine Failure Prevention Technologies, Edinburgh, UK, .4 p.
@conference{7ff470f0ef7f4df59c8cf412b91ab94b,
title = "A method for distinguishing between complex transient signals in condition monitoring applications",
abstract = "Partial discharges (PDs) are a cause of concern in power systems. Many detection methods and analysis techniques for PDs are available, such as UHF detection, conventional IEC 60270 method, acoustic detection, etc. This paper focuses on analysing signals obtained by the UHF method in order to distinguish between different sources of PD. Two methods based on the frequency and time characteristics are investigated with the aim of testing PD recognition based on the calculation of similarity or difference of two UHF signals. It has previously been shown that PDs can be recognized by a similarity function based on a time-frequency representation constructed using a wavelet transform. However, this is a computationally intensive process that needs to be simplified for practical implementation. Two new approaches are investigated in this paper. The first method uses spectrogram analysis to represent the UHF signal in terms of time, frequency and amplitude, from which a few key features can be extracted. The second method uses a smoothing kernel to capture the envelope of the UHF signal, effectively reducing the quantity of data to be analysed. The results from the two methods of comparing PD signals are discussed to determine their ability to measure similarity, while the results of non-PD signals are compared to show the different behaviours between PD and non-PD signals.",
keywords = "transient signals, machine failure, prevention technologies",
author = "Tanya Pinpart and Graeme West and Stuart Galloway and Martin Judd",
year = "2008",
month = "7",
day = "15",
doi = "10.1109/CMD.2008.4580465",
language = "English",
pages = "1060–1064",
note = "Fifth International Conference on Condition Monitoring and Machine Failure Prevention Technologies ; Conference date: 15-07-2008 Through 18-07-2008",

}

Pinpart, T, West, G, Galloway, S & Judd, M 2008, 'A method for distinguishing between complex transient signals in condition monitoring applications' Paper presented at Fifth International Conference on Condition Monitoring and Machine Failure Prevention Technologies, Edinburgh, UK, 15/07/08 - 18/07/08, pp. 1060–1064. https://doi.org/10.1109/CMD.2008.4580465

A method for distinguishing between complex transient signals in condition monitoring applications. / Pinpart, Tanya; West, Graeme; Galloway, Stuart; Judd, Martin.

2008. 1060–1064 Paper presented at Fifth International Conference on Condition Monitoring and Machine Failure Prevention Technologies, Edinburgh, UK, .

Research output: Contribution to conferencePaper

TY - CONF

T1 - A method for distinguishing between complex transient signals in condition monitoring applications

AU - Pinpart, Tanya

AU - West, Graeme

AU - Galloway, Stuart

AU - Judd, Martin

PY - 2008/7/15

Y1 - 2008/7/15

N2 - Partial discharges (PDs) are a cause of concern in power systems. Many detection methods and analysis techniques for PDs are available, such as UHF detection, conventional IEC 60270 method, acoustic detection, etc. This paper focuses on analysing signals obtained by the UHF method in order to distinguish between different sources of PD. Two methods based on the frequency and time characteristics are investigated with the aim of testing PD recognition based on the calculation of similarity or difference of two UHF signals. It has previously been shown that PDs can be recognized by a similarity function based on a time-frequency representation constructed using a wavelet transform. However, this is a computationally intensive process that needs to be simplified for practical implementation. Two new approaches are investigated in this paper. The first method uses spectrogram analysis to represent the UHF signal in terms of time, frequency and amplitude, from which a few key features can be extracted. The second method uses a smoothing kernel to capture the envelope of the UHF signal, effectively reducing the quantity of data to be analysed. The results from the two methods of comparing PD signals are discussed to determine their ability to measure similarity, while the results of non-PD signals are compared to show the different behaviours between PD and non-PD signals.

AB - Partial discharges (PDs) are a cause of concern in power systems. Many detection methods and analysis techniques for PDs are available, such as UHF detection, conventional IEC 60270 method, acoustic detection, etc. This paper focuses on analysing signals obtained by the UHF method in order to distinguish between different sources of PD. Two methods based on the frequency and time characteristics are investigated with the aim of testing PD recognition based on the calculation of similarity or difference of two UHF signals. It has previously been shown that PDs can be recognized by a similarity function based on a time-frequency representation constructed using a wavelet transform. However, this is a computationally intensive process that needs to be simplified for practical implementation. Two new approaches are investigated in this paper. The first method uses spectrogram analysis to represent the UHF signal in terms of time, frequency and amplitude, from which a few key features can be extracted. The second method uses a smoothing kernel to capture the envelope of the UHF signal, effectively reducing the quantity of data to be analysed. The results from the two methods of comparing PD signals are discussed to determine their ability to measure similarity, while the results of non-PD signals are compared to show the different behaviours between PD and non-PD signals.

KW - transient signals

KW - machine failure

KW - prevention technologies

U2 - 10.1109/CMD.2008.4580465

DO - 10.1109/CMD.2008.4580465

M3 - Paper

SP - 1060

EP - 1064

ER -

Pinpart T, West G, Galloway S, Judd M. A method for distinguishing between complex transient signals in condition monitoring applications. 2008. Paper presented at Fifth International Conference on Condition Monitoring and Machine Failure Prevention Technologies, Edinburgh, UK, . https://doi.org/10.1109/CMD.2008.4580465