Find Research Outputs

Search results

• Paper

  Upgrading legacy equipment to industry 4.0 through a cyber-physical interface

  Jónasdóttir, H., Dhanani, K., McRae, K. & Mehnen, J., 26 Aug 2018. 8 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Industry 4.0
  • Remote sensing
  • Internet of things
  • Decision making
  1 Citation (Scopus)

  53 Downloads (Pure)

• Uplink performance of distributed antenna diversity systems

  Tong, F., Glover, I. A., Pennock, S. & Shepherd, P., Aug 2004, p. 17-21. 4 p.

  Research output: Contribution to conference › Paper

  • Antennas

• Upper-bound solution and experimental validation for the analysis of pressure-assisted injection forging

  Ma, Y., Qin, Y. & Balendra, R., 9 Sep 2005.

  Research output: Contribution to conference › Paper

• Upskilling and intensification of work; are robots the answer?

  McQuarrie, J., Findlay, P. & Briken, K., 24 Aug 2019, (Unpublished).

  Research output: Contribution to conference › Paper

• URANS approach in hull-propeller-rudder interaction of a surface combatant at high speed

  Duman, S., Sezen, S. & Bal, S., 25 Oct 2017.

  Research output: Contribution to conference › Paper

  • Rudders
  • Propellers
  • Hydrodynamics
  • Ships
  • Guided missiles

• Urban form and travel behaviour: a statistical analysis using current and retrospective recall data

  Woods, L. & Ferguson, N. S., 2006, (Unpublished).

  Research output: Contribution to conference › Paper

• Urban form resilience urban design practice: masterplanning for change

  Romice, O., Feliciotti, A. & Porta, S., 10 Dec 2018.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Ecology
  • Adaptive systems
  • Ecosystems
  • Large scale systems
  • Uncertainty
  48 Downloads (Pure)

• Urban tourism and dispersal in Scotland

  MacLellan, L. R. & Burnside, R., 2003.

  Research output: Contribution to conference › Paper

• Usage of gestures along with other interaction modes in collaborative design

  Annamalai Vasantha, G. V., Ramesh, H. P., Sugavanam, C. M., Chakrabarti, A. & Corney, J., Sep 2014.

  Research output: Contribution to conference › Paper

  File

  • Computer aided design
  • Experiments
  91 Downloads (Pure)

• Use and miss-use of performance measures

  Bititci, U., 1994.

  Research output: Contribution to conference › Paper

• Use of an inertia-less virtual synchronous machine within future power networks with high penetrations of converters

  Yu, M., Roscoe, A. J., Booth, C. D., Dysko, A., Ierna, R., Zhu, J. & Urdal, H., 24 Jun 2016. 7 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Controllers
  • Wind turbines
  • Electric potential
  23 Citations (Scopus)

  544 Downloads (Pure)

• Use of case based reasoning for inspection qualification trial data

  McNab, D., Leggat, P., McNab, A. & Toft, M., Sep 2002, p. 261-261. 1 p.

  Research output: Contribution to conference › Paper

  • Case based reasoning
  • Inspection

• Use of expert systems in the specification of manufacturing systems

  Bititci, U., 1988.

  Research output: Contribution to conference › Paper

• Use of high intensity pulsed electric fields to inactivate spoilage microorganisms in wine

  Wall, K. A., Beveridge, J. R., MacGregor, S. J., Anderson, J. G. & Rowan, N., 2003, (Unpublished).

  Research output: Contribution to conference › Paper

• Use of Motek Medical CAREN extended to compare the effects of a stance control KAFO in locked and stance modes on walking and tripping

  Ross, K., 6 Sep 2014, (Unpublished).

  Research output: Contribution to conference › Paper

  • Patient rehabilitation
  • Projection screens
  • Biofeedback
  • Exercise equipment
  • Motion analysis

• Use of orbiting reflectors to decrease the technological challenges of surviving the lunar night

  Bewick, R., Sanchez Cuartielles, J-P. & McInnes, C., 3 Oct 2011, p. Article AIC-11-A5.1.11. 13 p.

  Research output: Contribution to conference › Paper

  File

  • Orbits
  • Moon
  • Lighting
  • Sun
  3 Citations (Scopus)

  233 Downloads (Pure)

• Use of oro-motor exercises in acquired dysarthria intervention

  Mackenzie, C., Muir, M. & Allen, C., 16 May 2009, (Unpublished).

  Research output: Contribution to conference › Paper

• Use of pressure spectral maps for analysis of influence of the plenum volume on the surge in centrifugal blower

  Kabalyk, K., Liskiewicz, G. P., Stickland, M., Horodko, L. & Kryllowicz, W., 16 Jun 2014. 10 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Blowers
  • Resonators
  • Flow rate
  • Fourier analysis
  • Flow structure
  11 Citations (Scopus)

  187 Downloads (Pure)

• Use of social media by U.S. hospitals: benefits and challenges

  Eckler, P., Arif, R. & O'Gara, E., 9 Aug 2012.

  Research output: Contribution to conference › Paper

• Use of the theory of planned behaviour to understand beliefs about use of AFOs in people with stroke

  McMonagle, C., Elliott, M. & Rasmussen, S., 2016.

  Research output: Contribution to conference › Paper

• User acceptance of m-government services in Saudi Arabia: an SEM approach

  Alotaibi, S. R. D. & Roussinov, D., 21 Mar 2017, (Accepted/In press).

  Research output: Contribution to conference › Paper

  Open Access

  File

  • e-government
  • Scanning electron microscopy
  • Bins
  • Developing countries
  • Chemical analysis
  228 Downloads (Pure)

• User - Thesaurus Interaction in a Web-Based Database: An Evaluation of Users' Term Selection Behaviour

  Shiri, A. A. & Revie, C. W., 2001, p. 23-32. 9 p.

  Research output: Contribution to conference › Paper

  File

  • Thesauri
  • Information retrieval systems
  27 Downloads (Pure)

• Using a collaborative approach to develop research questions

  Tonner, A. & Eckler, P., 27 Apr 2017.

  Research output: Contribution to conference › Paper

• Using a motorcycle rider behaviour questionnaire (MRBQ) to investigate the predictors of motorcyclists' crash risk

  Elliott, M. A., Baughan, C. J. & Sexton, B. F., Sep 2008, (Unpublished) p. 491–499. 9 p.

  Research output: Contribution to conference › Paper

  File
  20 Downloads (Pure)

• Using an extended theory of planned behaviour to examine the potential within cognition-change interventions to reduce the commission of driving violations

  Elliott, M., 2012.

  Research output: Contribution to conference › Paper

• Using artificial neural networks to identify and optimise the key parameters affecting geometry of a GMAW fillet weld

  Cairns, J., McPherson, N. & Galloway, A., 26 Apr 2015. 13 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Gas metal arc welding
  • Welds
  • Neural networks
  • Geometry
  • Structural integrity
  160 Downloads (Pure)

• Using a step recovery diode to generate repeatable pulses for partial discharge simulation

  Judd, M. D., Gray, D. & Reid, A. J., Aug 2005.

  Research output: Contribution to conference › Paper

• Using audio email feedback in formative assessment

  Spiers, A. & Macgregor, G., 18 Dec 2009, p. 1-19. 19 p.

  Research output: Contribution to conference › Paper

  Open Access

  File
  10 Downloads (Pure)

• Using bug report similarity to enhance bug localisation

  Davies, S., Roper, M. & Wood, M., 13 Oct 2012, p. 125-134. 10 p.

  Research output: Contribution to conference › Paper

  • Information retrieval
  22 Citations (Scopus)

• Using causal mapping in the analysis of semi-structured interviews

  Pyrko, I. & Dörfler, V., 13 Aug 2018. 36 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Structured Interview
  13 Downloads (Pure)

• Using coded excitation to maintain signal to noise for FMC+TFM on attenuating materials

  Lines, D., Mohseni, E., Javadi, Y., Mineo, C., Wathavana Vithanage, R. K., Qiu, Z., MacLeod, C. N., Pierce, G. & Gachagan, A., 6 Oct 2019. 4 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Acoustic noise
  • Signal to noise ratio
  • Ultrasonics
  • Pixels
  • Thermal noise
  17 Downloads (Pure)

• Using DDC to create a visual knowledge map as an aid to online information retrieval

  Chowdhury, S. & Chowdhury, G., 2004. 6 p.

  Research output: Contribution to conference › Paper

  File

  • Information retrieval
  • Display devices
  75 Downloads (Pure)

• Using digital libraries to enhance distributed design team performance

  Juster, N., Greirson, H., Nicol, D., Ion, B., Stone, A. & Wodehouse, A., Sep 2004.

  Research output: Contribution to conference › Paper

  • Digital libraries
  • Students
  • Studios
  • Testbeds
  • Teaching
  4 Citations (Scopus)

• Using digital music technology to promote healthy walking in non-traumatic trans-tibial amputees

  Rowe, D., McMinn, D., Peacock, L., Buis, A., Sutherland, R., Henderson, E. & Hewitt, A., 2013.

  Research output: Contribution to conference › Paper

• Using dynamic optimal power flow to inform the design and operation of active network management schemes

  Gill, S., Ault, G. & Kockar, I., Jun 2013. 4 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Active networks
  • Renewable energy resources
  • Electric power distribution
  • Energy storage
  • Wind power
  62 Downloads (Pure)

• Using engineering design tools in multidisciplinary distributed student teams

  Mamo, J., Farrugia, P., Borg, J., Wodehouse, A., Grierson, H. & Kovasevic, A., 3 Sep 2015, p. 99-104.

  Research output: Contribution to conference › Paper

  • Students
  • Engineers
  7 Citations (Scopus)

• Using FE simulation for flexible parts and assembly design in automotive industry

  Manarvi, I. A. & Juster, N. P., May 2004, (Unpublished).

  Research output: Contribution to conference › Paper

  • Automotive industry

• Using finite element method in preoperative planning for wrist surgery

  Gislason, M. K. & Nash, D. H., 23 Apr 2008.

  Research output: Contribution to conference › Paper

  File

  • Surgery
  • Planning
  • Finite element method
  • Bone
  • Boundary conditions
  41 Downloads (Pure)

• Using first pass yield to improve performance of an SME

  Bititci, U., Turner, T. & Mcalinden, N., 2003, (Unpublished).

  Research output: Contribution to conference › Paper

  File
  90 Downloads (Pure)

• Using focus group method to identifying citizen requirements to Saudi mobile government services

  Alotaibi, S. R. D. & Roussinov, D., 14 Mar 2017. 5 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Bins
  • Developing countries
  57 Downloads (Pure)

• Using gait analysis to compare functional outcome measures following total knee replacement performed with navigation or standard instrumentation techniques

  Dillon, JM., Clarke, JV., Nicol, AC., Picard, F., Gregori, A. & Kinninmonth, A., 5 Jun 2008.

  Research output: Contribution to conference › Paper

• Using ICFG guidelines for developing ECAP with enhanced productivity

  Olejnik, L. & Rosochowski, A., 2008, p. 1-7. 6 p.

  Research output: Contribution to conference › Paper

  • Equal channel angular pressing
  • Productivity
  • Plastic deformation
  • Aluminum
  • Metals

• Using 'ICT-supported' action research as an approach to teacher professional development and systematic enquiry

  Falzon, C., Higgins, S. A. & Wall, K., 18 Jun 2004.

  Research output: Contribution to conference › Paper

• Using learned action models in execution monitoring

  Fox, M., Gough, J., Long, D. & Qu, R. (ed.), 2006. 8 p.

  Research output: Contribution to conference › Paper

  File

  • Monitoring
  • Trajectories
  • Hidden Markov models
  • Robots
  • Uncertainty
  32 Downloads (Pure)

• Using LoRaWAN technology to enhance remote power network monitoring

  McPherson, R., Hay, C. & Irvine, J., 28 Apr 2019. 5 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Wide area networks
  • Overhead lines
  • Monitoring
  • Internet of things
  • Costs
  2 Citations (Scopus)

  65 Downloads (Pure)

• Using MACBETH with the choquet integral fundamentals to model interdependencies between elementary concerns in the context of risk management

  Lopes, D. F., Bana e Costa, C. A., Oliveira, M. D. & Morton, A., 2014.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Evaluation
  4 Citations (Scopus)

  145 Downloads (Pure)

• Using mapping techniques to develop PGDE Physics students' understanding of learning and teaching (Concept Mapping for PGDE Students – a Tentative Maybe from Physics?)

  Findlay, M., Sep 2007. 15 p.

  Research output: Contribution to conference › Paper

  File
  18 Downloads (Pure)

• Using movement studies to evaluate health technologies as part of a holistic assessment based on the WHO ICF dimensions of health

  Rowe, P. J., 2002, (Unpublished) p. 31.

  Research output: Contribution to conference › Paper

• Using multimedia with diverse learning tasks and tools to enhance teaching and learning, a case study from Scottish History

  Hillis, P., 2010.

  Research output: Contribution to conference › Paper

• Using multivariate regression techniques to analyse the performance of a steam heated drying process

  Balderud, J. & Wade, M. J., 2005. 6 p.

  Research output: Contribution to conference › Paper

  • Drying
  • Steam
  • Statistics