Catalin Pruncu

Research output

Research output per year 2020 2021

• 39 Article

Research output per year

Research output per year

Search results

• 2021

  A comparative analysis of laser additive manufacturing of high layer thickness pure Ti and Inconel 718 alloy materials using finite element method

  Singh, S. N., Chowdhury, S., Nirsanametla, Y., Deepati, A. K., Prakash, C., Singh, S., Wu, L. Y., Zheng, H. Y. & Pruncu, C., 12 Feb 2021, In: Materials. 14, 4, 19 p., 876.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • 3D printers
  • Titanium
  • Lasers
  • Finite element method
  • Scanning
  3 Downloads (Pure)

• A covid-19 supply chain management strategy based on variable production under uncertain environment conditions

  Alkahtani, M., Omair, M., Khalid, Q. S., Hussain, G., Ahmad, I. & Pruncu, C., 9 Feb 2021, In: International Journal of Environmental Research and Public Health. 18, 4, p. 1-23 23 p., 1662.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Supply chain management
  • Supply chains
  • Disasters
  • Profitability
  • Managers
  2 Downloads (Pure)

• An extended finite element method (XFEM) study on the elastic T-stress evaluations for a notch in a pipe steel exposed to internal pressure

  Yakoubi, K., Montassir, S., Moustabchir, H., Elkhalfi, A., Pruncu, C. I., Arbaoui, J. & Farooq, M. U., 2 Mar 2021, In: Mathematics. 9, 5, 10 p., 507.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  11 Downloads (Pure)

• Application of exact and multi-heuristic approaches to a sustainable closed loop supply chain network design

  Khan, A. S., Khalid, Q. S., Naeem, K., Ahmad, R., Khan, R., Saleem, W. & Pruncu, C. I., 24 Feb 2021, In: Sustainability (Switzerland). 13, 5, 25 p., 2433.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Supply chains
  • Economics
  • Customer satisfaction
  • Refrigeration
  • Costs
  2 Downloads (Pure)

• Bézier curves-based optimal trajectory design for multirotor UAVs with any-angle pathfinding algorithms

  Satai, H. A. L., Abdul Zahra, M. M., Rasool, Z. I., Abd-Ali, R. S. & Pruncu, C. I., 2 Apr 2021, In: Sensors. 21, 7, 22 p., 2460.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Unmanned aerial vehicles (UAV)
  • Trajectories
  • Cost functions

• Characterization of zinc oxide-urea formaldehyde nano resin and its impact on the physical performance of medium-density fiberboard

  Gul, W., Shah, S. R. A., Khan, A. & Pruncu, C. I., 25 Jan 2021, In: Polymers. 13, 3, 12 p., 371.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Zinc Oxide
  • Zinc oxide
  • Formaldehyde
  • Urea
  • Resins
  1 Downloads (Pure)

• Experimental investigation and multi-response optimization of machinability of AA5005H34 using composite desirability coupled with PCA

  Qazi, M. I., Abas, M., Khan, R., Saleem, W., Pruncu, C. I. & Omair, M., 31 Jan 2021, In: Metals. 11, 2, 24 p., 235.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Machinability
  • Surface roughness
  • Lubricants
  • Composite materials
  • Wear of materials
  33 Downloads (Pure)

• Microstructure and tribological response of selective laser melted AISI 316L stainless steel: the role of severe surface deformation

  Kumar, V., Joshi, M. D., Pruncu, C., Singh, I. & Hosmani, S. S., 12 Apr 2021, In: Journal of Materials Engineering and Performance.

  Research output: Contribution to journal › Article › peer-review

  • Selective laser melting
  • Austenitic stainless steel
  • Steel
  • Lasers
  • Microstructure

• Optimal design based on fabricated SiC/B4C/porcelain filled aluminium alloy matrix composite using hybrid AHP/CRITIC-COPRAS approach

  Aherwar, A., Pruncu, C. & Mia, M., 2 Jan 2021, In: Silicon.

  Research output: Contribution to journal › Article › peer-review

  • Dental Porcelain
  • Porcelain
  • Analytic hierarchy process
  • Aluminum alloys
  • Composite materials

• Optimization and fabrication of customized scaffold using additive manufacturing to match the property of human bone

  Begum, S. R., Kumar, M. S., Pruncu, C. I., Vasumathi, M. & Harikrishnan, P., 8 Jan 2021, In: Journal of Materials Engineering and Performance.

  Research output: Contribution to journal › Article › peer-review

  • Scaffolds
  • 3D printers
  • Bone
  • Fabrication
  • Polyamides
  1 Citation (Scopus)

• Optimization of the cycle time of robotics resistance spot welding for automotive applications

  Banga, H. K., Kalra, P., Kumar, R., Singh, S. & Pruncu, C. I., 3 Apr 2021, In: Journal of Advanced Manufacturing and Processing. 17 p., e10084.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Resistance welding
  • Spot welding
  • Robotics
  • Robots
  • Welding
  1 Downloads (Pure)

• Performance enhancement of stepped basin solar still based on OSELM with traversal tree for higher energy adaptive control

  Gandhi, A. M., Shanmugan, S., Gorjian, S., Pruncu, C., Sivakumar, S., Elsheikh, A. H., Essa, F. A., Omara, Z. M. & Panchal, H., 15 Apr 2021, In: Desalination. 502, 114926.

  Research output: Contribution to journal › Article › peer-review

  • Machine learning
  • Coatings
  • TiO2-SiO2
  • SiO2 nanoparticles
  • TiO2 nanoparticles
  1 Citation (Scopus)

• Quantifying geometrically necessary dislocation density during hot deformation in AA6082 Al alloy

  Zheng, J-H., Pruncu, C., Zhang, K., Zheng, K. & Jiang, J., 2 Apr 2021, In: Materials Science and Engineering: A.

  Research output: Contribution to journal › Article › peer-review

  • Hot working
  • Diffraction
  • Electrons
  • Scattering
  • Strain rate

• Quantitative analysis of sustainable use of construction materials for supply chain integration and construction industry performance through Structural Equation Modeling (SEM)

  Kamal, A., Azfar, R. W., Salah, B., Saleem, W., Abas, M., Khan, R. & Pruncu, C. I., 7 Jan 2021, In: Sustainability. 13, 2, 16 p., 522.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Construction industry
  • Supply chains
  • Chemical analysis
  • Industry
  2 Citations (Scopus)

  38 Downloads (Pure)

• Revealing an OSELM based on traversal tree for higher energy adaptive control using an efficient solar box cooker

  Thamizharasu, P., Shanmugan, S., Sivakumar, S., Pruncu, C. I., Kabeel, A. E., Nagaraj, J., Videla, L. S., Anand, K. V., Lamberti, L. & Laad, M., 1 Apr 2021, In: Solar Energy. 218, p. 320-336 17 p.

  Research output: Contribution to journal › Article › peer-review

  • SiO2 nanoparticles
  • TiO2 nanoparticles
  • Machine learning
  • Energy absorption
  • Nanoparticles

• Revealing the benefits of Entropy weights method for multi-objective optimization in machining operations: a critical review

  Kumar, R., Singh, S., Bilga, P. S., Jatin, Singh, J., Singh, S., Scutaru, M-L. & Pruncu, C. I., 28 Feb 2021, In: Journal of Materials Research and Technology. 10, p. 1471-1492 22 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Multiobjective optimization
  • Entropy
  • Machining
  • Machine tools
  • Decision making
  1 Downloads (Pure)

• Role of homogeneous distribution of SiC reinforcement on the characteristics of stir casted Al–SiC composites

  Kumar, M. S., Begum, S. R., Pruncu, C. I. & Asl, M. S., 17 Feb 2021, (Accepted/In press) In: Journal of Alloys and Compounds. 22 p.

  Research output: Contribution to journal › Article › peer-review

  • Reinforcement
  • Viscosity
  • Composite materials
  • Hardness
  • Glycerol

• Surface modification for osseointegration of Ti6Al4V ELI using powder mixed sinking EDM

  Mughal, M. P., Farooq, M. U., Mumtaz, J., Mia, M., Shareef, M., Javed, M., Jamil, M. & Pruncu, C. I., 31 Jan 2021, In: Journal of the Mechanical Behavior of Biomedical Materials. 113, 104145.

  Research output: Contribution to journal › Article › peer-review

  • titanium alloy (TiAl6V4)
  • silicon carbide
  • Surface treatment
  • Powders
  • Silicon carbide
  1 Citation (Scopus)

• The benefits of k-Carrageenan-gelatin hybrid composite coating on the medical grade stainless steel (SS304) used as anticorrosive barrier

  Muthulakshmi, L., Kumar, B. A., Rajasekar, A., Annaraj, J. & Pruncu, C. I., 15 Jan 2021, In: Materials Chemistry and Physics . 258, 123909.

  Research output: Contribution to journal › Article › peer-review

  • Biopolymers
  • Composite coatings
  • Carrageenan
  • Stainless Steel
  • Seaweed

• The effects of hot forging on the preform additive manufactured 316 stainless steel parts

  Hopper, C., Pruncu, C. I., Hooper, P. A., Tan, Z., Yang, S-T., Liu, Y. & Jiang, J., 30 Apr 2021, In: Micron. 143, 9 p., 103026.

  Research output: Contribution to journal › Article › peer-review

  • Forging
  • Austenitic stainless steel
  • Porosity
  • Microstructure
  • Mechanical properties

• Towards better performances for a novel rooftop solar PV system

  Behura, A. K., Kumar, A., Rajak, D. K., Pruncu, C. I. & Lamberti, L., 1 Mar 2021, In: Solar Energy. 216, p. 518-529 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Conversion efficiency
  • Sun
  • Energy conversion
  • Radiation
  • Costs

• Vibration exposure and transmissibility on dentist's anatomy: a study of micro motors and air-turbines

  Banga, H. K., Goel, P., Kumar, R., Kumar, V., Kalra, P., Singh, S., Singh, S., Prakash, C. & Pruncu, C., 13 Apr 2021, In: International Journal of Environmental Research and Public Health. 18, 8, 22 p., 4084.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Compressed air motors
  • Drilling
  • Obsolescence
  • Analysis of variance (ANOVA)
  • Statistical methods

• Visco-hyperelastic characterization of the equine immature zona pellucida

  Ficarella, E., Minooei, M., Santoro, L., Toma, E., Trentadue, B., De Spirito, M., Papi, M., Pruncu, C. I. & Lamberti, L., 5 Mar 2021, In: Materials. 14, 5, 15 p., 1223.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Membranes
  • Electron microscopy
  • Nanoindentation
  • Constitutive equations
  • Characterization (materials science)
  1 Downloads (Pure)
• 2020

  A comprehensive analysis of the effect of graphene-based dielectric for sustainable electric discharge machining of Ti-6Al-4V

  Ishfaq, K., Asad, M., Anwar, S., Pruncu, C. I., Saleh, M. & Ahmad, S., 23 Dec 2020, In: Materials. 14, 1, 24 p., 23.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Graphite
  • Kerosene
  • Graphene
  • Electric discharge machining
  • brass
  1 Downloads (Pure)

• A novel Ag/Carrageenan-gelatin hybrid hydrogel nanocomposite and its biological applications: preparation and characterization

  Muthulakshmi, L., Pavithra, U., Sivaranjani, V., Balasubramanian, N., Sakthivel, K. & Pruncu, C. I., 6 Dec 2020, (Accepted/In press) In: Journal of the Mechanical Behavior of Biomedical Materials.

  Research output: Contribution to journal › Article › peer-review

  • Hydrogels
  • Carrageenan
  • Polyethylene Glycol Dimethacrylate Hydrogel
  • Nanocomposites
  • Gelatin

• Comprehensive survey on nanobiomaterials for bone tissue engineering applications

  Kumar, P., Saini, M., Dehiya, B. S., Sindhu, A., Kumar, V., Kumar, R., Lamberti, L., Pruncu, C. I. & Thakur, R., 13 Oct 2020, In: Nanomaterials. 10, 10, 60 p., 2019.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Tissue engineering
  • Bone
  • Tissue
  • Biomaterials
  • Biocompatible Materials
  3 Citations (Scopus)

  4 Downloads (Pure)

• Contribution to the treatment of constraints due to standard boundary conditions in the context of the mixed Web-spline finite element method

  Koubaiti, O., Fakkoussi, S. E., El-Mekkaoui, J., Moustabchir, H., Elkhalfi, A. & Pruncu, C., 16 Dec 2020, (Accepted/In press) In: Engineering Computations.

  Research output: Contribution to journal › Article › peer-review

  • Splines
  • Boundary conditions
  • Lagrange multipliers
  • Elasticity
  • Linear systems

• Current global scenario of sputtered deposited NiTi smart systems

  Behera, A., Rajak, D. K., Kolahchi, R., Scutaru, M-L. & Pruncu, C. I., 31 Dec 2020, In: Journal of Materials Research and Technology. 9, 6, p. 14582-14598 17 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shape memory effect
  • Thin films
  • Magnetron sputtering
  • nitinol
  • Sputtering
  1 Downloads (Pure)

• Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication

  Szczotkarz, N., Mrugalski, R., Maruda, R. W., Królczyk, G. M., Legutko, S., Leksycki, K., Dębowski, D. & Pruncu, C. I., 30 Nov 2020, (Accepted/In press) In: Tribology International.

  Research output: Contribution to journal › Article › peer-review

  • Cutting tools
  • Austenitic stainless steel
  • Lubrication
  • Wear of materials
  • Machining

• Dynamic response of an inverted pendulum system in water under parametric excitations for energy harvesting: a conceptual approach

  Hasnain, S., Kallu, K. D., Nawaz, M. H., Abbas, N. & Pruncu, C. I., 7 Oct 2020, In: Energies. 13, 19, 15 p., 5215.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Pendulums
  • Energy harvesting
  • Dynamic response
  • Water
  • Vacuum
  1 Citation (Scopus)

  1 Downloads (Pure)

• Effectiveness improvement in manufacturing industry: trilogy study and open innovation dynamics

  Tayal, A., Kalsi, N. S., Gupta, M. K., Pimenov, D. Y., Sarikaya, M. & Pruncu, C. I., 30 Dec 2020, In: Journal of Open Innovation: Technology, Market and Complexity. 7, 1, 21 p., 7.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Industry
  • Productivity
  • Automotive industry
  • Availability
  1 Downloads (Pure)

• Experimental investigation of in-homogeneity in particle distribution during the processing of metal matrix composites

  Kumar, M. S., Pruncu, C., Harikrishnan, P., Begum, S. R. & Vasumathi, M., 2 Dec 2020, (Accepted/In press) In: Silicon.

  Research output: Contribution to journal › Article › peer-review

  • Metals
  • Vortex flow
  • Flow patterns
  • Composite materials
  • Casting

• Improved MRO inventory management system in oil and gas company: increased service level and reduced average inventory investment

  Ali, U., Salah, B., Naeem, K., Khan, A. S., Khan, R., Pruncu, C. I., Abas, M. & Khan, S., 29 Sep 2020, In: Sustainability. 12, 19, 19 p., 8027.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Repair
  • Oils
  • Gases
  • Industry
  • Costs
  1 Downloads (Pure)

• Improvement of thermal performance of a solar box type cooker using SiO2/TiO2 nanolayer

  Thamizharasu, P., Shanmugan, S., Gorjian, S., Pruncu, C. I., Essa, F. A., Panchal, H. & Harish, M., 25 Nov 2020, In: Silicon. 9 p.

  Research output: Contribution to journal › Article › peer-review

  • TiO2-SiO2
  • SiO2 nanoparticles
  • TiO2 nanoparticles
  • Hot Temperature
  • Cooking

• Influence of β-phase stability in elemental blended Ti-Mo and Ti-Mo-Zr alloys

  Mohan, P., Rajak, D. K., Pruncu, C. I., Behera, A., Amigó-Borrás, V. & Elshalakany, A. B., 26 Nov 2020, (Accepted/In press) In: Micron. 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Phase stability
  • Ti-Zr alloy
  • Mechanical properties
  • Molybdenum
  • Biomaterials

• Investigating the influence of WEDM process parameters in machining of hybrid aluminum composites

  Kumar, A., Grover, N., Manna, A., Chohan, J. S., Kumar, R., Singh, S., Prakash, C. & Pruncu, C. I., 15 Oct 2020, In: Advanced Composites Letters. 29, p. 1-14 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Electric discharge machining
  • Aluminum
  • Machining
  • Wire
  • Electric sparks
  1 Citation (Scopus)

  1 Downloads (Pure)

• Numerical modeling and analysis of Ti6Al4V alloy chip for biomedical applications

  Saleem, W., Salah, B., Velay, X., Ahmad, R., Khan, R. & Pruncu, C. I., 19 Nov 2020, In: Materials. 13, 22, 17 p., 5236.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Macros
  • Plastic flow
  • Shearing
  • Titanium alloys
  • Plastic deformation
  1 Citation (Scopus)

  1 Downloads (Pure)

• Optimization of WEDM for precise machining of novel developed Al6061-7.5% SiC squeeze casted composite

  Ishfaq, K., Anwar, S., Ali, M. A., Raza, M. H., Farooq, M. U., Ahmad, S., Pruncu, C. I., Saleh, M. & Salah, B., 1 Dec 2020, In: International Journal of Advanced Manufacturing Technology . 111, 7-8, p. 2031-2049 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Electric discharge machining
  • Machining
  • Wire
  • Composite materials
  • Electric potential
  2 Citations (Scopus)

  4 Downloads (Pure)

• Sustainable manufacturing and parametric analysis of mild steel grade 60 by deploying CNC milling machine and Taguchi method

  Azim, S., Noor, S., Khalid, Q. S., Khan, A. M., Pimenov, D. Y., Ahmad, I., Babar, A. R. & Pruncu, C. I., 29 Sep 2020, In: Metals. 10, 10, 18 p., 1303.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Milling machines
  • Taguchi methods
  • Carbon steel
  • Surface roughness
  • Molds
  2 Citations (Scopus)

  1 Downloads (Pure)