Skip to main navigation Skip to search Skip to main content

Steps towards market-ready far-UVC light emitting diodes – aspects of efficiency, reliability, modulation, and fiber coupling capability

  • Jens Rass (Invited speaker)
  • Jan Ruschel (Contributor)
  • Tim Kolbe (Contributor)
  • Hyun Kyong Cho (Contributor)
  • Martin Guttmann (Contributor)
  • Christoph Stölmacker (Contributor)
  • S. Hagedorn (Contributor)
  • Sven Einfeldt (Contributor)
  • Zimi, H. (Contributor)
  • Jonathan McKendry (Contributor)
  • Dawson, M. (Contributor)
  • Rajbhandari, S. (Contributor)
  • Herrnsdorf, J. (Contributor)
  • Sina Babadi (Contributor)
  • Isaac Osahon (Contributor)
  • Othman Younus (Contributor)
  • Harald Haas (Speaker)

Activity: Talk or Presentation › Invited talk

Description

Applications such as skin-friendly disinfection and gas sensing can be addressed using far-UVC light with wavelength below 235 nm. Light emitting diodes (LEDs) have unique advantages over conventional sources, e.g. their wavelength tunability, small form factor, and robustness, making them ideal sources. However, in order to make them suited for potential markets, their efficiency and lifetime still need to be improved even further.
In this talk, we will discuss technological aspects that are important for enhancing the applicability and boost the technological readiness level of far-UVC LEDs. Since efficiency and lifetime have shown to be often negatively correlated, the impact of optimizations along the entire production chain on both aspects will be considered.
The AlN-sapphire template and its defect density as well as the design of the epitaxially grown AlGaN semiconductor stack determine the LED’s internal quantum efficiency and lifetime. The chip design can improve both the LED’s lifetime by reducing the current density and the light extraction efficiency (LEE) by introducing internal reflector structures. Patterning the emitting area into micrometer sized pixels, a 7-fold LEE enhancement and a narrowing of the emission angle were achieved. This allows a more efficient coupling of UV-light into optical fibers, enabling new applications such as in-vivo disinfection in body cavities or gas analysis in hot or corrosive environments. Through an optimized chip design, up to 140 MHz modulation speed and 1.5 Gbps data rate were shown in optical communication. Finally, the chip mounting and packaging technology is found to influence both the gradual degradation rate and the probability of sudden catastrophic failures.
By combining and optimizing all of these aspects, FBH was able to demonstrate 233 nm LEDs with peak EQEs of 3.3%, 19 mW at 150 mA output power, and > 1 mW power transmitted through a quartz fiber.
PeriodJan 2027
Event titleSPIE Photonics West 2027
Event typeConference
LocationSan Francisco, United States, CaliforniaShow on map
Degree of RecognitionInternational